Kevin, On Mon, Aug 29, 2011 at 7:35 PM, Kevin Hilman <khilman@xxxxxx> wrote: > This is the first phase of the OMAP voltage layer cleanup. The > primary goal is to cleanup/reorganize data structures to facilitate > splitting apart the voltage processor (VP) and voltage controller (VC) > into separate layers. > > Based on v3.1-rc3 > > Series available in branch pm-wip/voltdm_a in my linux-omap-pm tree: > git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git Some comments have been sent on this patch set, otherwise OK after review. FWIW: Acked-by: Jean Pihet <j-pihet@xxxxxx> Regards, Jean > > Benoit Cousson (1): > OMAP4: powerdomain data: add voltage domains > > Kevin Hilman (21): > OMAP2+: hwmod: remove unused voltagedomain pointer > OMAP2+: voltage: move PRCM mod offets into VC/VP structures > OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain > OMAP2+: voltage: start towards a new voltagedomain layer > OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva" > OMAP3: voltagedomain data: add wakeup domain > OMAP3+: voltage: add scalable flag to voltagedomain > OMAP2+: powerdomain: add voltagedomain to struct powerdomain > OMAP2: add voltage domains and connect to powerdomains > OMAP3: powerdomain data: add voltage domains > OMAP2+: powerdomain: add voltage domain lookup during register > OMAP2+: voltage: keep track of powerdomains in each voltagedomain > OMAP2+: voltage: split voltage controller (VC) code into dedicated > layer > OMAP2+: voltage: move VC into struct voltagedomain, misc. renames > OMAP2+: voltage: enable VC bypass scale method when VC is initialized > OMAP2+: voltage: split out voltage processor (VP) code into new layer > OMAP2+: VC: support PMICs with separate voltage and command registers > OMAP2+: add PRM VP functions for checking/clearing VP TX done status > OMAP3+ VP: replace transaction done check/clear with VP ops > OMAP2+: PRM: add register access functions for VC/VP > OMAP3+: voltage: convert to PRM register access functions > > arch/arm/mach-omap2/Makefile | 5 +- > arch/arm/mach-omap2/io.c | 5 + > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 +- > arch/arm/mach-omap2/omap_twl.c | 20 +- > arch/arm/mach-omap2/pm.c | 4 +- > arch/arm/mach-omap2/powerdomain.c | 23 + > arch/arm/mach-omap2/powerdomain.h | 10 + > arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 2 + > arch/arm/mach-omap2/powerdomains2xxx_data.c | 4 + > arch/arm/mach-omap2/powerdomains3xxx_data.c | 16 + > arch/arm/mach-omap2/powerdomains44xx_data.c | 16 + > arch/arm/mach-omap2/prm2xxx_3xxx.c | 56 ++ > arch/arm/mach-omap2/prm2xxx_3xxx.h | 12 + > arch/arm/mach-omap2/prm44xx.c | 71 ++ > arch/arm/mach-omap2/prm44xx.h | 12 + > arch/arm/mach-omap2/sr_device.c | 2 +- > arch/arm/mach-omap2/vc.c | 259 +++++++ > arch/arm/mach-omap2/vc.h | 34 +- > arch/arm/mach-omap2/vc3xxx_data.c | 10 +- > arch/arm/mach-omap2/vc44xx_data.c | 14 +- > arch/arm/mach-omap2/voltage.c | 889 +++++----------------- > arch/arm/mach-omap2/voltage.h | 61 +- > arch/arm/mach-omap2/voltagedomains2xxx_data.c | 32 + > arch/arm/mach-omap2/voltagedomains3xxx_data.c | 53 +- > arch/arm/mach-omap2/voltagedomains44xx_data.c | 69 +- > arch/arm/mach-omap2/vp.c | 367 +++++++++ > arch/arm/mach-omap2/vp.h | 45 +- > arch/arm/mach-omap2/vp3xxx_data.c | 21 +- > arch/arm/mach-omap2/vp44xx_data.c | 28 +- > arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 - > 30 files changed, 1281 insertions(+), 864 deletions(-) > create mode 100644 arch/arm/mach-omap2/vc.c > create mode 100644 arch/arm/mach-omap2/voltagedomains2xxx_data.c > create mode 100644 arch/arm/mach-omap2/vp.c > > -- > 1.7.6 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
