. create a PM layer plugin for per-device constraints, compiled under CONFIG_OMAP_PM_CONSTRAINTS=y . implement the devices wake-up latency constraints using the global device PM QoS notification handler which applies the constraints to the underlying layer . implement the low level code which controls the power domains next power states, through the hwmod and pwrdm layers . add cpuidle and power domains wake-up latency figures for OMAP3, cf. [1] for the details on where the numbers are coming from . cpuidle is a CPU centric framework so it decides the MPU next power state based on the MPU exit_latency and target_residency figures. The rest of the power domains get their next power state programmed from the devices PM QoS framework, via the devices wake-up latency constraints. . convert the OMAP I2C driver to the PM QoS API for MPU latency constraints ToDo: 1. validate the constraints framework on OMAP4 HW (done on OMAP3) 2. re-visit the OMAP power domains states initialization procedure. Currently the power states that have been changed from the constraints API which were applied before the initialization of the power domains are lost Based on the pm-qos branch of the linux-pm git tree (3.1.0-rc3), cf. [2]. Tested on OMAP3 Beagleboard (ES2.x) with constraints on MPU, CORE, PER in RETention and OFF modes. [1] http://www.omappedia.org/wiki/Power_Management_Device_Latencies_Measurement [2] git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git Jean Pihet (8): OMAP: convert I2C driver to PM QoS for latency constraints OMAP: PM: create a PM layer plugin for per-device constraints OMAP2+: powerdomain: control power domains next state OMAP3: powerdomain data: add wake-up latency figures OMAP2+: omap_hwmod: manage the wake-up latency constraints OMAP: PM CONSTRAINTS: implement the devices wake-up latency constraints OMAP2+: cpuidle only influences the MPU state OMAP3: update cpuidle latency and threshold figures arch/arm/mach-omap2/cpuidle34xx.c | 56 ++--- arch/arm/mach-omap2/omap_hwmod.c | 26 ++- arch/arm/mach-omap2/pm.h | 17 ++- arch/arm/mach-omap2/powerdomain.c | 190 ++++++++++++++ arch/arm/mach-omap2/powerdomain.h | 33 +++- arch/arm/mach-omap2/powerdomains3xxx_data.c | 78 ++++++ arch/arm/plat-omap/Kconfig | 7 + arch/arm/plat-omap/Makefile | 1 + arch/arm/plat-omap/i2c.c | 20 -- arch/arm/plat-omap/include/plat/omap-pm.h | 128 ---------- arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 + arch/arm/plat-omap/omap-pm-constraints.c | 350 ++++++++++++++++++++++++++ arch/arm/plat-omap/omap-pm-noop.c | 89 ------- drivers/i2c/busses/i2c-omap.c | 31 ++- 14 files changed, 737 insertions(+), 291 deletions(-) create mode 100644 arch/arm/plat-omap/omap-pm-constraints.c -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
