Re: [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/09/11 20:08, Stephen Warren wrote:
> Marc Dietich wrote at Thursday, September 01, 2011 5:14 AM:
>> I'll add Stephen Warren from NVIDIA to the CC list. He has more HW to test on.
> 
> Here are the results I found:
> 
> Harmony:
> Tegra USB3 -> SMSC9514 hub: NOT affected
> (Unplugging LAN cable, or disabling SMSC9514 LAN driver doesn't change this)
> 
> Seaboard (springbank; clamshell):
> Tegra USB1 -> no hub: Affected
> 
> Seaboard (seaboard non-clamshell):
> Tegra USB1 -> no hub: Affected
> Tegra USB3 -> no hub: Affected
> 
> TrimSlice:
> Tegra USB3 -> unknown hub: Affected
> 
> This implies there's something different about Harmony.
> 
> Is the USB hub a clue? Seaboard doesn't have one, and although I don't
> know what model TrimSlice uses, I assume it's different since I know
> TrimSlice's Ethernet is not the same as Harmony's.

Panda has the exact same USB hub configuration, and is affected. So we
can rule this out.

> I don't see anything in board-harmony.c vs. board-seaboard.c that'd affect
> anything USB-related.
> 
> Perhaps there's some kind of bootloader or BCT difference. However, my
> Harmony and both Seaboards both use (a very old) U-Boot and BCT from
> ChromeOS, so I don't imagine there's actually much difference there.

I just noticed something else. Harmony is fast *most of the time*. In
about one in 3 reboots, I get the slow behavior. When USB is fast, I
also have I2C interrupts "screaming":

 85:     294321          0       GIC  tegra-i2c
116:          0          0       GIC  tegra-i2c
118:      98542          0       GIC  tps6586x

This is a couple of seconds after boot.

When USB is slow, I see the following:
[    0.385270] tps6586x 3-0034: Chip ID read failed: -121
[    0.390584] tps6586x: probe of 3-0034 failed with error -5

... and I2C interrupt is quiet.

The I2C interrupt handler calls writel(), which does a cache sync. That
would explain the "fast" behavior of Harmony.

Do you see the same this on your board?

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux