OMAPFB handles EDID parsing now, using the common helper functions in
fbdev. We can remove the EDID parsing from HDMI driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/omap2/dss/hdmi.c | 137 ----------------------------
drivers/video/omap2/dss/hdmi_omap4_panel.c | 8 +--
2 files changed, 1 insertions(+), 144 deletions(-)
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 5e66cb8..b5aca64 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -53,9 +53,6 @@ static struct {
void __iomem *base_wp; /* HDMI wrapper */
int code;
int mode;
- u8 edid[HDMI_EDID_MAX_LENGTH];
- u8 edid_set;
- bool custom_set;
struct hdmi_config cfg;
struct clk *sys_clk;
@@ -146,8 +143,6 @@ static const int code_vesa[85] = {
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, 27, 28, -1, 33};
-static const u8 edid_header[8] = {0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0};
-
static inline void hdmi_write_reg(const struct hdmi_reg idx, u32 val)
{
__raw_writel(val, hdmi.base_wp + idx.idx);
@@ -561,129 +556,6 @@ static struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing)
return cm;
}
-static void get_horz_vert_timing_info(int current_descriptor_addrs, u8 *edid ,
- struct omap_video_timings *timings)
-{
- /* X and Y resolution */
- timings->x_res = (((edid[current_descriptor_addrs + 4] & 0xF0) << 4) |
- edid[current_descriptor_addrs + 2]);
- timings->y_res = (((edid[current_descriptor_addrs + 7] & 0xF0) << 4) |
- edid[current_descriptor_addrs + 5]);
-
- timings->pixel_clock = ((edid[current_descriptor_addrs + 1] << 8) |
- edid[current_descriptor_addrs]);
-
- timings->pixel_clock = 10 * timings->pixel_clock;
-
- /* HORIZONTAL FRONT PORCH */
- timings->hfp = edid[current_descriptor_addrs + 8] |
- ((edid[current_descriptor_addrs + 11] & 0xc0) << 2);
- /* HORIZONTAL SYNC WIDTH */
- timings->hsw = edid[current_descriptor_addrs + 9] |
- ((edid[current_descriptor_addrs + 11] & 0x30) << 4);
- /* HORIZONTAL BACK PORCH */
- timings->hbp = (((edid[current_descriptor_addrs + 4] & 0x0F) << 8) |
- edid[current_descriptor_addrs + 3]) -
- (timings->hfp + timings->hsw);
- /* VERTICAL FRONT PORCH */
- timings->vfp = ((edid[current_descriptor_addrs + 10] & 0xF0) >> 4) |
- ((edid[current_descriptor_addrs + 11] & 0x0f) << 2);
- /* VERTICAL SYNC WIDTH */
- timings->vsw = (edid[current_descriptor_addrs + 10] & 0x0F) |
- ((edid[current_descriptor_addrs + 11] & 0x03) << 4);
- /* VERTICAL BACK PORCH */
- timings->vbp = (((edid[current_descriptor_addrs + 7] & 0x0F) << 8) |
- edid[current_descriptor_addrs + 6]) -
- (timings->vfp + timings->vsw);
-
-}
-
-/* Description : This function gets the resolution information from EDID */
-static void get_edid_timing_data(u8 *edid)
-{
- u8 count;
- u16 current_descriptor_addrs;
- struct hdmi_cm cm;
- struct omap_video_timings edid_timings;
-
- /* search block 0, there are 4 DTDs arranged in priority order */
- for (count = 0; count < EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR; count++) {
- current_descriptor_addrs =
- EDID_DESCRIPTOR_BLOCK0_ADDRESS +
- count * EDID_TIMING_DESCRIPTOR_SIZE;
- get_horz_vert_timing_info(current_descriptor_addrs,
- edid, &edid_timings);
- cm = hdmi_get_code(&edid_timings);
- DSSDBG("Block0[%d] value matches code = %d , mode = %d\n",
- count, cm.code, cm.mode);
- if (cm.code == -1) {
- continue;
- } else {
- hdmi.code = cm.code;
- hdmi.mode = cm.mode;
- DSSDBG("code = %d , mode = %d\n",
- hdmi.code, hdmi.mode);
- return;
- }
- }
- if (edid[0x7e] != 0x00) {
- for (count = 0; count < EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR;
- count++) {
- current_descriptor_addrs =
- EDID_DESCRIPTOR_BLOCK1_ADDRESS +
- count * EDID_TIMING_DESCRIPTOR_SIZE;
- get_horz_vert_timing_info(current_descriptor_addrs,
- edid, &edid_timings);
- cm = hdmi_get_code(&edid_timings);
- DSSDBG("Block1[%d] value matches code = %d, mode = %d",
- count, cm.code, cm.mode);
- if (cm.code == -1) {
- continue;
- } else {
- hdmi.code = cm.code;
- hdmi.mode = cm.mode;
- DSSDBG("code = %d , mode = %d\n",
- hdmi.code, hdmi.mode);
- return;
- }
- }
- }
-
- DSSINFO("no valid timing found , falling back to VGA\n");
- hdmi.code = 4; /* setting default value of 640 480 VGA */
- hdmi.mode = HDMI_DVI;
-}
-
-static void hdmi_read_edid(struct omap_video_timings *dp)
-{
- int ret = 0, code;
-
- memset(hdmi.edid, 0, HDMI_EDID_MAX_LENGTH);
-
- if (!hdmi.edid_set)
- ret = read_edid(hdmi.edid, HDMI_EDID_MAX_LENGTH);
-
- if (ret > 0) {
- if (!memcmp(hdmi.edid, edid_header, sizeof(edid_header))) {
- /* search for timings of default resolution */
- get_edid_timing_data(hdmi.edid);
- hdmi.edid_set = true;
- }
- } else {
- DSSWARN("failed to read E-EDID\n");
- }
-
- if (!hdmi.edid_set) {
- DSSINFO("fallback to VGA\n");
- hdmi.code = 4; /* setting default value of 640 480 VGA */
- hdmi.mode = HDMI_DVI;
- }
-
- code = get_timings_index();
-
- *dp = cea_vesa_timings[code].timings;
-}
-
static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
struct hdmi_core_infoframe_avi *avi_cfg,
struct hdmi_core_packet_enable_repeat *repeat_cfg)
@@ -1138,12 +1010,7 @@ static int hdmi_power_on(struct omap_dss_device *dssdev)
dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
- if (!hdmi.custom_set) {
- DSSDBG("Read EDID as no EDID is not set on poweron\n");
- hdmi_read_edid(p);
- }
code = get_timings_index();
- dssdev->panel.timings = cea_vesa_timings[code].timings;
update_hdmi_timings(&hdmi.cfg, p, code);
phy = p->pixel_clock;
@@ -1205,8 +1072,6 @@ static void hdmi_power_off(struct omap_dss_device *dssdev)
hdmi_phy_off();
hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF);
hdmi_runtime_put();
-
- hdmi.edid_set = 0;
}
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
@@ -1228,8 +1093,6 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
{
struct hdmi_cm cm;
- hdmi.custom_set = 1;
-
cm = hdmi_get_code(&dssdev->panel.timings);
hdmi.code = cm.code;
hdmi.mode = cm.mode;
diff --git a/drivers/video/omap2/dss/hdmi_omap4_panel.c b/drivers/video/omap2/dss/hdmi_omap4_panel.c
index 7adaf7a..5e314e8 100644
--- a/drivers/video/omap2/dss/hdmi_omap4_panel.c
+++ b/drivers/video/omap2/dss/hdmi_omap4_panel.c
@@ -40,13 +40,7 @@ static int hdmi_panel_probe(struct omap_dss_device *dssdev)
dssdev->panel.config = OMAP_DSS_LCD_TFT |
OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS;
- /*
- * Initialize the timings to 640 * 480
- * This is only for framebuffer update not for TV timing setting
- * Setting TV timing will be done only on enable
- */
- dssdev->panel.timings.x_res = 640;
- dssdev->panel.timings.y_res = 480;
+ dssdev->panel.timings = (struct omap_video_timings){640, 480, 25175, 96, 16, 48, 2 , 11, 31};
DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
dssdev->panel.timings.x_res,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
