Currently, the nominal voltage is updated in the VC post-scale function which is common to both scaling methods. However, this has readabiliy problems as this update is not where it might be expected. Instead, move the updated into voltdm_scale() upon a successful return of voltdm->scale() Signed-off-by: Kevin Hilman <khilman@xxxxxx> --- arch/arm/mach-omap2/vc.c | 2 -- arch/arm/mach-omap2/voltage.c | 6 +++++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 130df29..1c2bb9c 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -143,8 +143,6 @@ void omap_vc_post_scale(struct voltagedomain *voltdm, smps_delay = ((smps_steps * voltdm->pmic->step_size) / voltdm->pmic->slew_rate) + 2; udelay(smps_delay); - - voltdm->nominal_volt = target_volt; } /* vc_bypass_scale - VC bypass method of voltage scaling */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 441c2d9..64070ac 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -85,7 +85,11 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } - return voltdm->scale(voltdm, target_volt); + ret = voltdm->scale(voltdm, target_volt); + if (!ret) + voltdm->nominal_volt = target_volt; + + return ret; } /** -- 1.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
