Hi,
[...]
> arch/arm/mach-omap2/board-omap3evm.c | 25 +++++++++++++++++++++++++
> 1 files changed, 25 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-
> omap2/board-omap3evm.c
> index c452b3f..13a2b71 100644
> --- a/arch/arm/mach-omap2/board-omap3evm.c
> +++ b/arch/arm/mach-omap2/board-omap3evm.c
> @@ -377,6 +377,10 @@ static int omap3evm_twl_gpio_setup(struct device
> *dev,
> if (r)
> printk(KERN_ERR "failed to get/set lcd_bkl gpio\n");
>
> + /* gpio + 2 == HSUSB2 Clock Enable */
This comment should be modified. gpio+2 not only enables EHCI but also camera and
Audio lines.
> + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
> + gpio_request_one(gpio + 2, GPIOF_OUT_INIT_LOW,
> "EN_HSUSB2_CLK");
This name "EN_HSUSB2_CLK" should also be changed.
Ajay
> +
> /* gpio + 7 == DVI Enable */
> gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
>
> @@ -450,6 +454,25 @@ static struct regulator_init_data omap3evm_vio = {
> .consumer_supplies = omap3evm_vio_supply,
> };
>
> +/* VAUX2 for EHCI */
> +static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
> + REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
> +};
> +
> +static struct regulator_init_data omap3evm_vaux2 = {
> + .constraints = {
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = true,
> + .valid_modes_mask = REGULATOR_MODE_NORMAL
> + | REGULATOR_MODE_STANDBY,
> + .valid_ops_mask = REGULATOR_CHANGE_MODE
> + | REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vaux2_supplies),
> + .consumer_supplies = omap3evm_vaux2_supplies,
> +};
> +
> #ifdef CONFIG_WL12XX_PLATFORM_DATA
>
> #define OMAP3EVM_WLAN_PMENA_GPIO (150)
> @@ -510,6 +533,8 @@ static int __init omap3_evm_i2c_init(void)
>
> omap3evm_twldata.vdac->constraints.apply_uV = true;
> omap3evm_twldata.vpll2->constraints.apply_uV = true;
> + if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
> + omap3evm_twldata.vaux2 = &omap3evm_vaux2;
>
> omap3_pmic_init("twl4030", &omap3evm_twldata);
> omap_register_i2c_bus(2, 400, NULL, 0);
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
