This patch integrates TI816X and TI814X hwmods into hwmods framework. Note that a TI81XX specific function ti81xx_cm_wait_module_ready() is added to wait for module to become ready since corresponding OMAP2/3 function omap2_cm_wait_module_ready() cannot be used as there are no IDLEST registers in TI81XX. Signed-off-by: Hemant Pedanekar <hemantp@xxxxxx> --- arch/arm/mach-omap2/Makefile | 2 + arch/arm/mach-omap2/cm2xxx_3xxx.h | 1 + arch/arm/mach-omap2/cm81xx.c | 54 ++++++++++++++++++++++++++ arch/arm/mach-omap2/io.c | 1 + arch/arm/mach-omap2/omap_hwmod.c | 13 ++++-- arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 + 6 files changed, 68 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-omap2/cm81xx.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 087412a..7c340e0 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -80,6 +80,7 @@ endif obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o \ vc3xxx_data.o vp3xxx_data.o +obj-$(CONFIG_SOC_OMAPTI81XX) += cm81xx.o # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and # will be removed once the OMAP4 part of the codebase is converted to # use OMAP4-specific PRCM functions. @@ -161,6 +162,7 @@ obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \ obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \ omap_hwmod_2xxx_3xxx_interconnect_data.o \ omap_hwmod_3xxx_data.o +obj-$(CONFIG_SOC_OMAPTI81XX) += omap_hwmod_81xx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o # EMU peripherals diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index 11401c1..e11d4ee 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -122,6 +122,7 @@ extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask); extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask); extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask); +extern int ti81xx_cm_wait_module_ready(u16 inst, u16 clkctrl_reg); extern void ti816x_cm_clkdm_enable_hwsup(s16 inst, u16 clkdm, u32 mask); extern void ti816x_cm_clkdm_disable_hwsup(s16 inst, u16 clkdm, u32 mask); extern void ti816x_cm_clkdm_force_sleep(s16 inst, u16 clkdm, u32 mask); diff --git a/arch/arm/mach-omap2/cm81xx.c b/arch/arm/mach-omap2/cm81xx.c new file mode 100644 index 0000000..84d1645 --- /dev/null +++ b/arch/arm/mach-omap2/cm81xx.c @@ -0,0 +1,54 @@ +/* + * TI81XX CM module functions + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on arch/arm/mach-omap2/cm4xxx.c, original copyright follows: + * + * Copyright (C) 2009 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <plat/common.h> + +#include "cm.h" +#include "cm-regbits-816x.h" +#include "cm816x.h" + +/** + * ti81xx_cm_wait_module_ready - wait for a module to be in 'func' state + * @inst: Offset of CM instance associated with + * @clkctrl_reg: CLKCTRL offset from CM instance base + * + * Wait for the module IDLEST to be functional. If the idle state is in any + * the non functional state (trans, idle or disabled), module and thus the + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + * + * Module idle state: + * 0x0 func: Module is fully functional, including OCP + * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep + * abortion + * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if + * using separate functional clock + * 0x3 disabled: Module is disabled and cannot be accessed + * + */ +int ti81xx_cm_wait_module_ready(u16 inst, u16 clkctrl_reg) +{ + int i = 0; + + omap_test_timeout(( + ((__raw_readl(TI816X_CM_REGADDR(inst, clkctrl_reg)) & + TI816X_IDLEST_MASK) == 0)), MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 969b730..525ec63 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -354,6 +354,7 @@ void __init omap2_init_common_infrastructure(void) omap3xxx_clockdomains_init(); ti816x_clockdomains_init(); omap3xxx_hwmod_init(); + ti81xx_hwmod_init(); } else if (cpu_is_omap44xx()) { omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 84cc0bd..49fbd4da 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1051,7 +1051,7 @@ static struct omap_hwmod *_lookup(const char *name) */ static int _init_clkdm(struct omap_hwmod *oh) { - if (cpu_is_omap24xx() || cpu_is_omap34xx()) + if (cpu_is_omap24xx() || (cpu_is_omap34xx() && !cpu_is_ti81xx())) return 0; if (!oh->clkdm_name) { @@ -1134,9 +1134,14 @@ static int _wait_target_ready(struct omap_hwmod *oh) /* XXX check clock enable states */ if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, - oh->prcm.omap2.idlest_reg_id, - oh->prcm.omap2.idlest_idle_bit); + if (cpu_is_ti81xx()) + ret = ti81xx_cm_wait_module_ready(oh->clkdm->cm_inst, + oh->prcm.omap4.clkctrl_offs); + else + ret = omap2_cm_wait_module_ready( + oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); } else if (cpu_is_omap44xx()) { if (!oh->clkdm) return -EINVAL; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0e329ca..901d277 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -615,5 +615,6 @@ extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); +extern int ti81xx_hwmod_init(void); #endif -- 1.7.3.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html