Re: [RFC/PATCH v2 08/13] dt: omap: i2c: add dt support for i2c1 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Grant,

On Tue, Aug 23, 2011 at 10:03:36AM +0500, G, Manjunath Kondaiah wrote:
> 
> The device tree support has been added to i2c1 controller and
> corresponding i2c initilization in generic board file is cleaned
> up so that platfom device is registered through dt and omap device
> and not through board i2c initilization.
> 
> These changes will not affect non dt builds and existing functionality
> is retained.
> 
> Tested with dt and non dt builds and boot tested on beagle board.
> 
> Signed-off-by: G, Manjunath Kondaiah <manjugk@xxxxxx>
> ---
>  arch/arm/mach-omap2/board-omap3-dt.c |   14 +++++++-------
>  drivers/i2c/busses/i2c-omap.c        |   23 ++++++++++++++++++++---
>  2 files changed, 27 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3-dt.c b/arch/arm/mach-omap2/board-omap3-dt.c
> index 72c59a4..cd11224 100644
> --- a/arch/arm/mach-omap2/board-omap3-dt.c
> +++ b/arch/arm/mach-omap2/board-omap3-dt.c
> @@ -35,11 +35,11 @@ static struct twl4030_platform_data beagle_twldata = {
>  	/* platform_data for children goes here */
>  };
>  
> -static int __init omap3_beagle_i2c_init(void)
> -{
> -	omap3_pmic_init("twl4030", &beagle_twldata);
> -	return 0;
> -}
> +struct of_dev_auxdata omap3_auxdata_lookup[] __initdata = {
> +	OF_DEV_AUXDATA_ID_PDSIZE("ti,omap-i2c", 0x48070000, "i2c1", 1,\
> +				&beagle_twldata, sizeof(beagle_twldata)),
> +	{}
> +};
>  
>  static void __init omap3_init_early(void)
>  {
> @@ -61,11 +61,11 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
>  
>  static void __init omap3_init(void)
>  {
> -	omap3_beagle_i2c_init();
>  	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
>  	omap_serial_init();
>  
> -	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
> +	of_platform_populate(NULL, omap_dt_match_table, omap3_auxdata_lookup,
> +									 NULL);
>  }
>  
>  static const char *omap3_dt_match[] __initdata = {
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 2a072ff..9e98014 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -38,6 +38,7 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  #include <linux/of_i2c.h>
> +#include <linux/of_device.h>
>  #include <linux/slab.h>
>  #include <linux/i2c-omap.h>
>  #include <linux/pm_runtime.h>
> @@ -972,6 +973,16 @@ static const struct i2c_algorithm omap_i2c_algo = {
>  	.functionality	= omap_i2c_func,
>  };
>  
> +#if defined(CONFIG_OF)
> +static const struct of_device_id omap_i2c_of_match[] = {
> +	{.compatible = "ti,omap-i2c", },
> +	{},
> +}
> +MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
> +#else
> +#define omap_i2c_of_match NULL
> +#endif
> +
>  static int __devinit
>  omap_i2c_probe(struct platform_device *pdev)
>  {
> @@ -1008,12 +1019,17 @@ omap_i2c_probe(struct platform_device *pdev)
>  		goto err_release_region;
>  	}
>  
> +	speed = 100;	/* Default speed */
>  	if (pdata != NULL) {
>  		speed = pdata->clkrate;
>  		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
> -	} else {
> -		speed = 100;	/* Default speed */
> -		dev->set_mpu_wkup_lat = NULL;
> +#if defined(CONFIG_OF)
> +	} else if (pdev->dev.of_node) {
> +		u32 prop;
> +		if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
> +									&prop))
> +			speed = prop/100;
> +#endif

This function calls of_i2c_register_devices which attaches all the required
parameters reg, irq, archdata etc into i2c adapter. But it will not attach 
platform_data which results empty pdata pointer in i2c child devices.

Is this done purposefully? If so, how do we get pdata pointer in i2c child 
device.

-M

>  	}
>  
>  	dev->speed = speed;
> @@ -1178,6 +1194,7 @@ static struct platform_driver omap_i2c_driver = {
>  		.name	= "omap_i2c",
>  		.owner	= THIS_MODULE,
>  		.pm	= OMAP_I2C_PM_OPS,
> +		.of_match_table = omap_i2c_of_match,
>  	},
>  };
>  
> -- 
> 1.7.4.1
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/devicetree-discuss
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux