On Fri, Aug 12, 2011 at 12:55 PM, Ming Lei <tom.leiming@xxxxxxxxx> wrote:
> On Fri, Aug 12, 2011 at 1:46 PM, Munegowda, Keshava
> <keshava_mgowda@xxxxxx> wrote:
>> On Thu, Aug 11, 2011 at 8:53 PM, Ming Lei <tom.leiming@xxxxxxxxx> wrote:
>
>>>> +static struct omap_hwmod_class_sysconfig omap34xx_usb_host_hs_sysc = {
>>>> + .rev_offs = 0x0000,
>>>> + .sysc_offs = 0x0010,
>>>> + .syss_offs = 0x0014,
>>>> + .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
>>>
>>> SYSC_HAS_ENAWAKEUP is missed or not needed?
>>
>> not needed. wakeup will through irq-chaining mechanism.
>
> I am wondering how irq-chaining mechanism can wakeup MPU, could you
> describe it in a little detail?
>
> In fact, I have tested usb remote wakeup on rc1 plus your patches on beagle
> xm, seems the usb mouse can't wakeup MPU at all.
>
>>>
>>>> + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
>>>> + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
>>>> + .sysc_fields = &omap_hwmod_sysc_type1,
>>>> +};
>>>> +
>>>> +static struct omap_hwmod_class omap34xx_usb_host_hs_hwmod_class = {
>>>> + .name = "usbhs_uhh",
>>>> + .sysc = &omap34xx_usb_host_hs_sysc,
>>>> +};
>>>> +
>>>> +static struct omap_hwmod_ocp_if *omap34xx_usb_host_hs_masters[] = {
>>>> + &omap34xx_usb_host_hs__l3_main_2,
>>>> +};
>>>> +
>>>> +static struct omap_hwmod_addr_space omap34xx_usb_host_hs_addrs[] = {
>>>> + {
>>>> + .name = "uhh",
>>>> + .pa_start = 0x48064000,
>>>> + .pa_end = 0x480643ff,
>>>> + .flags = ADDR_TYPE_RT
>>>> + },
>>>> + {} /* Terminating Entry */
>>>> +};
>>>> +
>>>> +static struct omap_hwmod_ocp_if omap34xx_l4_cfg__usb_host_hs = {
>>>> + .master = &omap3xxx_l4_core_hwmod,
>>>> + .slave = &omap34xx_usb_host_hs_hwmod,
>>>> + .clk = "l4_ick",
>>>> + .addr = omap34xx_usb_host_hs_addrs,
>>>> + .user = OCP_USER_MPU | OCP_USER_SDMA,
>>>> +};
>>>
>>> Even USBHOST_L4_ICLK is used only by USBHOST_SICLK, it is better to
>>> define a "usbhost_siclk" clk for consistence with TRM.
>>
>> I dint understand, what is the change you are suggesting?
>
> From 23.2.1 of OMAP35x TRM(Rev. M), USBHOST_SICLK inside
> 'High-speed USB Host controller' is driven by L4 slave interface
> clock, so looks like l4 iclk should be parent of USBHOST_SICLK.
>
> Considered USBHOST_L4_ICLK is used only by USBHOST_SICLK,
> you may ignore my question about it.
>
> thanks,
> --
> Ming Lei
Thanks Ming Lei
keshava
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
