From: Charulatha V <charu@xxxxxx> In omap3, save/restore context is implemented for GPIO banks 2-6 as GPIO bank1 is in wakeup domain. Instead of identifying bank's power domain by bank id, use 'loses_context' flag which is filled by pwrdm_can_ever_lose_context() during dev_init. For getting the powerdomain pointer, omap_hwmod_get_pwrdm() is used. omap_device_get_pwrdm() could not be used as the pwrdm information needs to be filled in pdata, whereas omap_device_get_pwrdm() could be used only after omap_device_build() call. Signed-off-by: Charulatha V <charu@xxxxxx> --- arch/arm/mach-omap2/gpio.c | 6 ++++++ arch/arm/plat-omap/include/plat/gpio.h | 1 + drivers/gpio/gpio-omap.c | 13 ++++++------- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index f805cda..95195a8 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -24,6 +24,8 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include "powerdomain.h" + static struct omap_device_pm_latency omap_gpio_latency[] = { [0] = { .deactivate_func = omap_device_idle_hwmods, @@ -39,6 +41,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) struct omap_gpio_dev_attr *dev_attr; char *name = "omap_gpio"; int id; + struct powerdomain *pwrdm; /* * extract the device id from name field available in the @@ -107,6 +110,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return -EINVAL; } + pwrdm = omap_hwmod_get_pwrdm(oh); + pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm); + od = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata), omap_gpio_latency, ARRAY_SIZE(omap_gpio_latency), diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index dd330ed..58d0bf2 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -198,6 +198,7 @@ struct omap_gpio_platform_data { int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ struct omap_gpio_reg_offs *regs; }; diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 13d5ca4..aaf07b8 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -56,6 +56,7 @@ struct gpio_bank { u32 dbck_enable_mask; struct device *dev; bool dbck_flag; + bool loses_context; int stride; u32 width; u16 id; @@ -1176,7 +1177,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) bank->dbck_flag = pdata->dbck_flag; bank->stride = pdata->bank_stride; bank->width = pdata->bank_width; - + bank->loses_context = pdata->loses_context; bank->regs = pdata->regs; if (bank->regs->set_dataout && bank->regs->clr_dataout) @@ -1332,8 +1333,7 @@ void omap2_gpio_prepare_for_idle(int off_mode) u32 l1 = 0, l2 = 0; int j; - /* TODO: Do not use cpu_is_omap34xx */ - if ((cpu_is_omap34xx()) && (bank->id == 0)) + if (!bank->loses_context) continue; for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) @@ -1400,8 +1400,7 @@ void omap2_gpio_resume_after_idle(void) u32 l = 0, gen, gen0, gen1; int j; - /* TODO: Do not use cpu_is_omap34xx */ - if ((cpu_is_omap34xx()) && (bank->id == 0)) + if (!bank->loses_context) continue; for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) @@ -1500,7 +1499,7 @@ void omap_gpio_save_context(void) list_for_each_entry(bank, &omap_gpio_list, node) { i++; - if (bank->id == 0) + if (!bank->loses_context) continue; gpio_context[i].irqenable1 = @@ -1534,7 +1533,7 @@ void omap_gpio_restore_context(void) list_for_each_entry(bank, &omap_gpio_list, node) { i++; - if (bank->id == 0) + if (!bank->loses_context) continue; __raw_writel(gpio_context[i].irqenable1, -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html