From: Colin Cross <ccross@xxxxxxxxxx> omap_sr_disable_reset_volt is called with irqs off in omapx_enter_sleep, as part of idle sequence, this eventually calls sr_disable and pm_runtime_put_sync. pm_runtime_put_sync calls rpm_idle, which will enable interrupts in order to call the callback. In this short interval when interrupts are enabled, scenarios such as the following can occur: while interrupts are enabled, the timer interrupt that is supposed to wake the device out of idle occurs and is acked, so when the CPU finally goes to off, the timer is already gone, missing a wakeup event. Further, as the documentation for runtime states:" However, subsystems can use the pm_runtime_irq_safe() helper function to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume() callbacks should be invoked in atomic context with interrupts disabled (->runtime_idle() is still invoked the default way)." Hence, replace pm_runtime_put_sync with pm_runtime_put_sync_suspend to invoke the suspend handler and shut off the fclk for SmartReflex module instead of using the idle handler in interrupt disabled context. Signed-off-by: Nishanth Menon <nm@xxxxxx> Signed-off-by: Colin Cross <ccross@xxxxxxxxxx> --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index fb7dc52..33a027f 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -622,7 +622,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
