Board code should not touch omap_device internals. To get the MPU/IVA devices,
use existing APIs: omap2_get_mpu_device(), omap2_get_iva_device().
Signed-off-by: Kevin Hilman <khilman@xxxxxx>
---
arch/arm/mach-omap2/board-omap3beagle.c | 23 ++++++++++-------------
1 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 32f5f89..3ae16b4 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -491,23 +491,22 @@ static void __init beagle_opp_init(void)
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
- struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
- struct omap_hwmod *dh = omap_hwmod_lookup("iva");
- struct device *dev;
+ struct device *mpu_dev, *iva_dev;
- if (!mh || !dh) {
+ mpu_dev = omap2_get_mpuss_device();
+ iva_dev = omap2_get_iva_device();
+
+ if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
- __func__, mh, dh);
+ __func__, mpu_dev, iva_dev);
return;
}
/* Enable MPU 1GHz and lower opps */
- dev = &mh->od->pdev.dev;
- r = opp_enable(dev, 800000000);
+ r = opp_enable(mpu_dev, 800000000);
/* TODO: MPU 1GHz needs SR and ABB */
/* Enable IVA 800MHz and lower opps */
- dev = &dh->od->pdev.dev;
- r |= opp_enable(dev, 660000000);
+ r |= opp_enable(iva_dev, 660000000);
/* TODO: DSP 800MHz needs SR and ABB */
if (r) {
pr_err("%s: failed to enable higher opp %d\n",
@@ -516,10 +515,8 @@ static void __init beagle_opp_init(void)
* Cleanup - disable the higher freqs - we dont care
* about the results
*/
- dev = &mh->od->pdev.dev;
- opp_disable(dev, 800000000);
- dev = &dh->od->pdev.dev;
- opp_disable(dev, 660000000);
+ opp_disable(mpu_dev, 800000000);
+ opp_disable(iva_dev, 660000000);
}
}
return;
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
