From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
The RX-51 uses the CSIb IO complex for camera operation. The
board file is missing definition for the regulator supplying
the CSIb complex, so this is added for better power
management.
Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: tony@xxxxxxxxxxx
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
Tony, can I push this patch through the V4L/DVB tree, or would you like to
pick it yourself ?
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 88bd6f7..17e5685 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -361,6 +361,9 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
static struct regulator_consumer_supply rx51_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply rx51_vaux2_supply =
+ REGULATOR_SUPPLY("vdds_csib", "omap3isp");
+
static struct regulator_consumer_supply rx51_vaux3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
@@ -424,6 +427,8 @@ static struct regulator_init_data rx51_vaux2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vaux2_supply,
};
/* VAUX3 - adds more power to VIO_18 rail */
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
