Hi Tony, On Fri, Jul 08, 2011 at 04:55:21AM -0700, Tony Lindgren wrote: > * Sergei Shtylyov <sshtylyov@xxxxxxxxxx> [110708 04:45]: > > Hello. > > > > On 08-07-2011 14:04, Jan Weitzel wrote: > > > > >Signed-off-by: Jan Weitzel<j.weitzel@xxxxxxxxx> > > >--- > > > arch/arm/mach-omap2/Kconfig | 5 +++++ > > > arch/arm/mach-omap2/Makefile | 4 ++++ > > > 2 files changed, 9 insertions(+), 0 deletions(-) > > > > >diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > > >index 19d5891..c6a2d43 100644 > > >--- a/arch/arm/mach-omap2/Kconfig > > >+++ b/arch/arm/mach-omap2/Kconfig > > [...] > > >diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > > >index b148077..e81b594 100644 > > >--- a/arch/arm/mach-omap2/Makefile > > >+++ b/arch/arm/mach-omap2/Makefile > > >@@ -238,6 +238,10 @@ obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \ > > > hsmmc.o \ > > > omap_phy_internal.o > > > > > >+obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o \ > > > > You need to first add board-omap4pcm049.c, and only then wire it > > to the Makefile. You could do both in onme patch though... > > Yes looks like this should be just one patch for everything. Are you or are you not taking now board files ? We have one which was left out due to a comment from Russell stating that no new board-files would be accepted until the move to device tree was completed [1] [1] http://marc.info/?t=130199607500006&r=1&w=2 -- balbi
Attachment:
signature.asc
Description: Digital signature
