Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jul 05, 2011 at 10:37:40AM -0700, Kevin Hilman wrote:
> While I did design the OMAP PM core to be runtime PM centric, and we
> implemented several drivers based on runtime PM alone, after some long
> discussions on linux-pm[1] with Alan and Rafael (PM maintainer) over the
> last couple weeks, I'm now convinced I had the wrong design/approach.
> 
> Rafael and Alan have been patient with my stubborness, but now I've been
> pursuaded.  Rafael has detailed on linux-pm the various
> problems/limitations/races between runtime PM and system PM[2], so I
> don't plan debating them again here.
> 
> That being said, today we have several drivers that use runtime PM calls
> in their suspend/resume path and our PM domain implementation (inside
> omap_device) deals with most of the limitations fine.  However, there
> are 2 main problems/limitation with this that we've chosen to live with
> (for now):
>         
> 1) synchronous calls must be used in the suspend/resume path (because
>    PM workqueue is frozen during suspend/resumea)
> 2) disabling runtime PM from userspace will prevent that device
>    from hitting its low-power state during suspend.
> 
> For v3.1 (and before), we've lived with these limitations, and I'm OK
> with merging other drivers for v3.1 with these limitations.  After 3.1,
> this will be changing (more on this below.)  
> 
> So, while I've been OK with merging drivers with the above limitations
> for one more merge window, $SUBJECT patch adds a new twist by forcibly
> managing the parent device from the child device.  Personally, I really
> don't like that approach and it serves as a good illustration of yet
> another reason why system PM and runtime PM need understood as
> conceptually very different.
> 
> For v3.2, the PM core will change[2] to futher limit/protect
> interactions between runtime PM and system PM, and I will be reworking
> our PM domain (omap_device) implementation accordingly.  
> 
> Basically, what that will mean is that our PM domain layer (omap_device)
> will also call omap_device_idle() in the suspend path, but only if the
> device is *not* already idle (from previous runtime suspend.)  The PM
> domain layer will then omap_device_enable() the device in the system
> resume path if it was suspended in the system suspend path.  A minimally
> tested patch to do this is below.
> 
> So, the driver still does not have to care about it's specific clocks
> etc. (which should address Felipe's concern), clocks and other
> IP-specific PM details will all continue to be handled by omap_device,
> just like it is with runtime PM.
> 
> The primary change to the driver, is that whatever needs to be done to
> prepare for both runtime PM and system PM (including context
> save/restore etc.) will have to be done in a common function(s) that
> will be called by *both* of its ->runtime_suspend() and ->suspend()
> callbacks, and similar for ->runtime_resume() and ->resume().  
> 
> Some drivers will have additional work to do for system PM though.  This
> is mainly because system PM can happen at *any* time, including in the
> middle of ongoing activity, whereas runtime PM transitions happen when
> the device is known to be idle.  What that means is that for example, a
> drivers ->suspend() method might need to wait for (or forcibly stop) any
> ongoing activity in order to be sure the device is ready to be suspended.
> 
> Frankly, this is not a very big change for the drivers, as the
> device-specific idle work will still be handled by the PM domain layer.
> 
> Hope that helps clarify the background.
> 
> As for this particular patch, since it is rather late in the development
> cycle for v3.1, I would recommend that it wait until the omap_device
> changes, and then let the PM core (for system PM and runtime PM) handle
> the parent/child relationships as they are designed to.   But that is up
> to Felipe and USB maintainers to decide.
> 
> Kevin
> 
> [1] https://lists.linux-foundation.org/pipermail/linux-pm/2011-June/031559.html
> [2] https://lists.linux-foundation.org/pipermail/linux-pm/2011-June/031977.html
> 
> 
> From 6696e9a2b106ca9c9936e5c2ad89650010120e10 Mon Sep 17 00:00:00 2001
> From: Kevin Hilman <khilman@xxxxxx>
> Date: Tue, 7 Jun 2011 16:07:28 -0700
> Subject: [PATCH] OMAP: PM: omap_device: add system PM methods for PM domain handling
> 
> Using PM domain callbacks, use omap_device idle/enable to
> automatically suspend/resume devices.  Also use pm_generic_* routines
> to ensure driver's callbacks are correctly called.
> 
> Driver ->suspend callback is needed to ensure the driver is in a state
> that it can be suspended.
> 
> If device is already idle (typically because of previous runtime PM
> activity), there's nothing extra to do.
> 
> KJH: The omap_device_* calls should probably actually be done in the
>      _noirq() methods.
> 
> Not-yet-Signed-off-by: Kevin Hilman <khilman@xxxxxx>
> ---
>  arch/arm/plat-omap/include/plat/omap_device.h |    4 +++
>  arch/arm/plat-omap/omap_device.c              |   32 +++++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
> index e4c349f..bc36d05 100644
> --- a/arch/arm/plat-omap/include/plat/omap_device.h
> +++ b/arch/arm/plat-omap/include/plat/omap_device.h
> @@ -44,6 +44,9 @@ extern struct device omap_device_parent;
>  #define OMAP_DEVICE_STATE_IDLE		2
>  #define OMAP_DEVICE_STATE_SHUTDOWN	3
>  
> +/* omap_device.flags values */
> +#define OMAP_DEVICE_SUSPENDED BIT(0)
> +
>  /**
>   * struct omap_device - omap_device wrapper for platform_devices
>   * @pdev: platform_device
> @@ -73,6 +76,7 @@ struct omap_device {
>  	s8				pm_lat_level;
>  	u8				hwmods_cnt;
>  	u8				_state;
> +	u8                              flags;
>  };
>  
>  /* Device driver interface (call via platform_data fn ptrs) */
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index 49fc0df..f2711c3 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -564,12 +564,44 @@ static int _od_runtime_resume(struct device *dev)
>  	return pm_generic_runtime_resume(dev);
>  }
>  
> +static int _od_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct omap_device *od = to_omap_device(pdev);
> +	int ret;
> +
> +	ret = pm_generic_suspend(dev);
> +
> +	od->flags &= ~OMAP_DEVICE_SUSPENDED;
> +
> +	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
> +		omap_device_idle(pdev);
> +		od->flags |= OMAP_DEVICE_SUSPENDED;
> +	}
> +
> +	return ret;
> +}
> +
> +static int _od_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct omap_device *od = to_omap_device(pdev);

seems like you guys have duplicated helpers for this. There's
_find_by_pdev() and to_omap_device and both do the exact same thing:

static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
{
	return container_of(pdev, struct omap_device, pdev);
}

#define to_omap_device(x) container_of((x), struct omap_device, pdev)

> +
> +	if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
> +	    (od->_state == OMAP_DEVICE_STATE_IDLE))
> +		omap_device_enable(pdev);
> +	
> +	return pm_generic_resume(dev);
> +}
> +
>  static struct dev_power_domain omap_device_power_domain = {
>  	.ops = {
>  		.runtime_suspend = _od_runtime_suspend,
>  		.runtime_idle = _od_runtime_idle,
>  		.runtime_resume = _od_runtime_resume,
>  		USE_PLATFORM_PM_SLEEP_OPS
> +		.suspend = _od_suspend,
> +		.resume = _od_resume,
>  	}
>  };

it all depends on when are you planning to get this patch upstream. I'm
considering getting some PM working on USB host and remove the
pm_runtime calls from system suspend/resume either during -rc or next
merge window.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux