List, I try to get gpio_191 ping interrupted on panda but never succeeded. What I do is 1. set 0x410b on dpm_emu19 register to enable interrupt and wakeup on gpio_191 2. set bit 31 to 1 on GPIO_IRQSTATUS_SET_0 register at 0x4805d034 3. set bit 31 to 1 on GPIO_IRQWAKEN_0 register at 0x4805d044 4. set bit 31 to 0 on GPIO_OE register at 0x4805d134 (output) 5. set bit 31 to 1 on GPIO_SETDATAOUT register at 0x4805d194 Then I expect I should see interrupt on GPIO_IRQSTATUS_0 register at 0x4805d02c. But nothing happens for both output and input (put pin on ground or 1,8v). Would you please give me hint what I miss here to get interrupt happened? I want to use gpio_191 for IR receiver. Thanks. ---henry -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
