From: Charulatha V <charu@xxxxxx>
Call runtime pm APIs pm_runtime_get_sync() and pm_runtime_put_sync()
for enabling/disabling clocks appropriately. Remove syscore_ops and
instead use dev_pm_ops now.
Signed-off-by: Charulatha V <charu@xxxxxx>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
---
drivers/gpio/gpio-omap.c | 99 ++++++++++++++++++++++++++++++++++++----------
1 files changed, 78 insertions(+), 21 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index f1e346b..66eff1d 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -80,6 +80,8 @@ struct gpio_bank {
struct omap_gpio_reg_offs *regs;
};
+static void omap_gpio_mod_init(struct gpio_bank *bank);
+
#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
#define GPIO_MOD_CTRL_BIT BIT(0)
@@ -475,6 +477,22 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
unsigned long flags;
+ /*
+ * If this is the first gpio_request for the bank,
+ * enable the bank module.
+ */
+ if (!bank->mod_usage) {
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_get_sync failed\n",
+ __func__, bank->id);
+ return -EINVAL;
+ }
+
+ /* Initialize the gpio bank registers to init time value */
+ omap_gpio_mod_init(bank);
+ }
+
spin_lock_irqsave(&bank->lock, flags);
/* Set trigger to none. You need to enable the desired trigger with
@@ -532,6 +550,18 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
_reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
+
+ /*
+ * If this is the last gpio to be freed in the bank,
+ * disable the bank module.
+ */
+ if (!bank->mod_usage) {
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_put_sync failed\n",
+ __func__, bank->id);
+ }
+ }
}
/*
@@ -556,6 +586,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
chained_irq_enter(chip, desc);
bank = irq_get_handler_data(irq);
+
+ pm_runtime_get_sync(bank->dev);
+
isr_reg = bank->base + bank->regs->irqstatus;
if (WARN_ON(!isr_reg))
@@ -618,6 +651,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
exit:
if (!unmasked)
chained_irq_exit(chip, desc);
+
+ pm_runtime_put_sync(bank->dev);
}
static void gpio_irq_shutdown(struct irq_data *d)
@@ -1048,12 +1083,25 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
}
pm_runtime_enable(bank->dev);
- pm_runtime_get_sync(bank->dev);
+ pm_runtime_irq_safe(bank->dev);
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_get_sync "
+ "failed\n", __func__, bank->id);
+ iounmap(bank->base);
+ return -EINVAL;
+ }
omap_gpio_mod_init(bank);
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_put_sync "
+ "failed\n", __func__, bank->id);
+ iounmap(bank->base);
+ return -EINVAL;
+ }
+
list_add_tail(&bank->node, &omap_gpio_list);
return ret;
@@ -1064,10 +1112,12 @@ err_exit:
return ret;
}
-static int omap_gpio_suspend(void)
+static int omap_gpio_suspend(struct device *dev)
{
struct gpio_bank *bank;
+ pm_runtime_get_sync(dev);
+
list_for_each_entry(bank, &omap_gpio_list, node) {
void __iomem *base = bank->base;
void __iomem *wake_status;
@@ -1085,31 +1135,34 @@ static int omap_gpio_suspend(void)
spin_unlock_irqrestore(&bank->lock, flags);
}
+ pm_runtime_put_sync(dev);
+
return 0;
}
-static void omap_gpio_resume(void)
+static int omap_gpio_resume(struct device *dev)
{
struct gpio_bank *bank;
+ pm_runtime_get_sync(dev);
+
list_for_each_entry(bank, &omap_gpio_list, node) {
void __iomem *base = bank->base;
unsigned long flags;
if (!bank->regs->wkup_status)
- return;
+ return 0;
spin_lock_irqsave(&bank->lock, flags);
MOD_REG_BIT(bank->regs->wkup_status, 0xffffffff, 0);
MOD_REG_BIT(bank->regs->wkup_status, bank->saved_wakeup, 1);
spin_unlock_irqrestore(&bank->lock, flags);
}
-}
-static struct syscore_ops omap_gpio_syscore_ops = {
- .suspend = omap_gpio_suspend,
- .resume = omap_gpio_resume,
-};
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -1133,6 +1186,11 @@ void omap2_gpio_prepare_for_idle(int off_mode)
if (!off_mode)
continue;
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0))
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_put_sync failed\n",
+ __func__, bank->id);
+
/* If going to OFF, remove triggering for all
* non-wakeup GPIOs. Otherwise spurious IRQs will be
* generated. See OMAP2420 Errata item 1.101. */
@@ -1173,6 +1231,11 @@ void omap2_gpio_resume_after_idle(void)
if (!bank->loses_context)
continue;
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0))
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_get_sync failed\n",
+ __func__, bank->id);
+
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_enable(bank->dbck);
@@ -1288,10 +1351,16 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
}
#endif
+static const struct dev_pm_ops gpio_pm_ops = {
+ .suspend = omap_gpio_suspend,
+ .resume = omap_gpio_resume,
+};
+
static struct platform_driver omap_gpio_driver = {
.probe = omap_gpio_probe,
.driver = {
.name = "omap_gpio",
+ .pm = &gpio_pm_ops,
},
};
@@ -1306,15 +1375,3 @@ static int __init omap_gpio_drv_reg(void)
}
postcore_initcall(omap_gpio_drv_reg);
-static int __init omap_gpio_sysinit(void)
-{
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (cpu_is_omap16xx() || cpu_class_is_omap2())
- register_syscore_ops(&omap_gpio_syscore_ops);
-#endif
-
- return 0;
-}
-
-arch_initcall(omap_gpio_sysinit);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
