Re: [PATCHv4 3/9] OMAP3: PM: remove serial resume / idle calls from idle path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 29, 2011 at 2:34 PM, Tero Kristo <t-kristo@xxxxxx> wrote:
> This is no longer needed as it will be handled within serial driver itself.
>

Can be marked as tmp same is done with uart runtime

https://patchwork.kernel.org/patch/862332/

--
Thanks,
Govindraj.R

> Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
> ---
>  arch/arm/mach-omap2/pm34xx.c |   19 -------------------
>  1 files changed, 0 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> index 89cf027..e626a3d 100644
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -335,18 +335,9 @@ void omap_sram_idle(void)
>                omap3_enable_io_chain();
>        }
>
> -       /* Block console output in case it is on one of the OMAP UARTs */
> -       if (!is_suspending())
> -               if (per_next_state < PWRDM_POWER_ON ||
> -                   core_next_state < PWRDM_POWER_ON)
> -                       if (!console_trylock())
> -                               goto console_still_active;
> -
>        /* PER */
>        if (per_next_state < PWRDM_POWER_ON) {
>                per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
> -               omap_uart_prepare_idle(2);
> -               omap_uart_prepare_idle(3);
>                omap2_gpio_prepare_for_idle(per_going_off);
>                if (per_next_state == PWRDM_POWER_OFF)
>                                omap3_per_save_context();
> @@ -354,8 +345,6 @@ void omap_sram_idle(void)
>
>        /* CORE */
>        if (core_next_state < PWRDM_POWER_ON) {
> -               omap_uart_prepare_idle(0);
> -               omap_uart_prepare_idle(1);
>                if (core_next_state == PWRDM_POWER_OFF) {
>                        omap3_core_save_context();
>                        omap3_cm_save_context();
> @@ -402,8 +391,6 @@ void omap_sram_idle(void)
>                        omap3_sram_restore_context();
>                        omap2_sms_restore_context();
>                }
> -               omap_uart_resume_idle(0);
> -               omap_uart_resume_idle(1);
>                if (core_next_state == PWRDM_POWER_OFF)
>                        omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
>                                               OMAP3430_GR_MOD,
> @@ -417,14 +404,8 @@ void omap_sram_idle(void)
>                omap2_gpio_resume_after_idle();
>                if (per_prev_state == PWRDM_POWER_OFF)
>                        omap3_per_restore_context();
> -               omap_uart_resume_idle(2);
> -               omap_uart_resume_idle(3);
>        }
>
> -       if (!is_suspending())
> -               console_unlock();
> -
> -console_still_active:
>        /* Disable IO-PAD and IO-CHAIN wakeup */
>        if (omap3_has_io_wakeup() &&
>            (per_next_state < PWRDM_POWER_ON ||
> --
> 1.7.4.1
>
>
> Texas Instruments Oy, Tekniikantie 12, 02150 Espoo. Y-tunnus: 0115040-6. Kotipaikka: Helsinki
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux