On Wednesday 29 June 2011, Ohad Ben-Cohen wrote: > On Wed, Jun 29, 2011 at 2:44 AM, Randy Dunlap <rdunlap@xxxxxxxxxxxx> wrote: > >> +hardware accelerators, and therefore are often used to offload cpu-intensive > > > > prefer: CPU- > > throughout. > > Isn't that changing the meaning a bit ? Let's stick with the original > version, I think it's more clear. I think you misunderstood Randy, he meant you should do 's/cpu/CPU/' globally, which does not change the meaning. > >> +system's physical memory and/or other sensitive hardware resources (e.g. on > >> +OMAP4, remote cores (/hardware accelerators) may have direct access to the > >> +physical memory, gpio banks, dma controllers, i2c bus, gptimers, mailbox > >> +devices, hwspinlocks, etc..). Moreover, those remote processors might be > >> +running RTOS where every task can access the entire memory/devices exposed > >> +to the processor. To minimize the risks of rogue (/buggy) userland code > > > > What is with the leading / here and above (/hardware) and below? > > / here means "or". You can read the sentence twice, either without the > (/ ..) options or with them, and then you get two (different) > examples. > > Any idea how to make it more readable ? I prefer not to drop the > second example, as it's adding information. The easiest way would be to replace it with 'or', as in ... remote cores (or hardware accelerators) may have ... I would also suggest you drop the parentheses, especially in the first case where you have two levels of them: system's physical memory and/or other sensitive hardware resources, e.g. on OMAP4, remote cores and hardware accelerators may have direct access to the specific hardware blocks such as physical memory, gpio banks or dma controllers. Moreover, those remote processors might be... > >> +if RPMSG > >> + > >> +# OK, it's a little counter-intuitive to do this, but it puts it neatly under > >> +# the rpmsg menu (and it's the approach preferred by the virtio folks). > >> + > >> +source "drivers/virtio/Kconfig" > > > > It seems odd to have that Kconfig file sourced in multiple places. > > Are the kconfig tools happy with that? > > They are, probably because these places are mutually exclusive today: > > $ git grep "drivers/virtio/Kconfig" > arch/ia64/kvm/Kconfig:source drivers/virtio/Kconfig > arch/mips/Kconfig:source drivers/virtio/Kconfig > arch/powerpc/kvm/Kconfig:source drivers/virtio/Kconfig > arch/s390/kvm/Kconfig:source drivers/virtio/Kconfig > arch/sh/Kconfig:source drivers/virtio/Kconfig > arch/tile/kvm/Kconfig:source drivers/virtio/Kconfig > arch/x86/kvm/Kconfig:source drivers/virtio/Kconfig > > Now that we start using virtio for inter-processor communications, > too, we might soon bump into a situation where virtio will be sourced > twice. > > Probably the solution is to move 'source "drivers/virtio/Kconfig"' > into drivers/Kconfig, and remove all other instances. I think changing that would be good. However, you need to at least restructure the contents, or they will show up in the main driver menu. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
