"Govindraj.R" <govindraj.raja@xxxxxx> writes: > Cleanup serial.c file in preparation to addition of runtime api's in omap-serial > file. Remove all clock handling mechanism as this will be taken care with > pm runtime api's in omap-serial.c file itself. > > 1.) Remove omap-device enable and disable. We can can use get_sync/put_sync api's > 2.) Remove context save/restore can be done with runtime_resume callback for > get_sync call. No need to save context as all reg details available in > uart_port structure can be used for restore, so add missing regs in > uart port struct. > 3.) Add func to identify console uart. > 4.) Erratum handling informed as flag to driver and func to handle erratum > can be moved to omap-serial driver itself. > > Acked-by: Alan Cox <alan@xxxxxxxxxxxxxxx> > Signed-off-by: Govindraj.R <govindraj.raja@xxxxxx> [...] > @@ -47,65 +40,9 @@ > #include "control.h" > #include "mux.h" > > -#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 > -#define UART_OMAP_WER 0x17 /* Wake-up enable register */ > - > -#define UART_ERRATA_FIFO_FULL_ABORT (0x1 << 0) > -#define UART_ERRATA_i202_MDR1_ACCESS (0x1 << 1) > - > -/* > - * NOTE: By default the serial timeout is disabled as it causes lost characters > - * over the serial ports. This means that the UART clocks will stay on until > - * disabled via sysfs. This also causes that any deeper omap sleep states are > - * blocked. > - */ > -#define DEFAULT_TIMEOUT 0 > - > -#define MAX_UART_HWMOD_NAME_LEN 16 > +#define MAX_UART_HWMOD_NAME_LEN 16 Minor: only whitespace change here, you converted tabs to spaces. Rest of this looks fine. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
