[CC'ing Liam and Mark as well]
On 24 June 2011 20:07, Jassi Brar <jaswinder.singh@xxxxxxxxxx> wrote:
> VUSB is a fixed level line and hence have no set_voltage
> callback in regulator ops, but has apply_uV set to true.
> As a result it fails to register with the regulator core.
> Remove setting apply_uV.
>
> Also, assign name to VUSB supply, without which regulator core
> fails to find it and assigns the default 'dummy' regulator to
> the ehci-omap device.
>
> Signed-off-by: Jassi Brar <jaswinder.singh@xxxxxxxxxx>
> ---
> arch/arm/mach-omap2/board-4430sdp.c | 6 +++++-
> arch/arm/mach-omap2/board-omap4panda.c | 6 +++++-
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> index 63de2d3..1ec60be 100644
> --- a/arch/arm/mach-omap2/board-4430sdp.c
> +++ b/arch/arm/mach-omap2/board-4430sdp.c
> @@ -504,16 +504,20 @@ static struct regulator_init_data sdp4430_vdac = {
> },
> };
>
> +static struct regulator_consumer_supply sdp4430_vusb_supply =
> + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
> +
> static struct regulator_init_data sdp4430_vusb = {
> .constraints = {
> .min_uV = 3300000,
> .max_uV = 3300000,
> - .apply_uV = true,
> .valid_modes_mask = REGULATOR_MODE_NORMAL
> | REGULATOR_MODE_STANDBY,
> .valid_ops_mask = REGULATOR_CHANGE_MODE
> | REGULATOR_CHANGE_STATUS,
> },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &sdp4430_vusb_supply,
> };
>
> static struct regulator_init_data sdp4430_clk32kg = {
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index d4f9879..7429f7e 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -362,16 +362,20 @@ static struct regulator_init_data omap4_panda_vdac = {
> },
> };
>
> +static struct regulator_consumer_supply omap4_panda_vusb_supply =
> + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
> +
> static struct regulator_init_data omap4_panda_vusb = {
> .constraints = {
> .min_uV = 3300000,
> .max_uV = 3300000,
> - .apply_uV = true,
> .valid_modes_mask = REGULATOR_MODE_NORMAL
> | REGULATOR_MODE_STANDBY,
> .valid_ops_mask = REGULATOR_CHANGE_MODE
> | REGULATOR_CHANGE_STATUS,
> },
> + .num_consumer_supplies = 1,
> + .consumer_supplies = &omap4_panda_vusb_supply,
> };
>
> static struct regulator_init_data omap4_panda_clk32kg = {
> --
> 1.7.4.1
>
>
--
Linaro.org │ Open source software for ARM SoCs | Follow Linaro
http://facebook.com/pages/Linaro/155974581091106 -
http://twitter.com/#!/linaroorg - http://linaro.org/linaro-blog
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
