The current selection of the GPTIMER on was result of a hardware issue in early versions of the Beagleboards (Ax and B1 thru B4). [1] [2] Its been long since the hardware issue has been fixed. This patch uses GPTIMER 1 for all newer board revisions incl. Beagleboard XM. [1] http://thread.gmane.org/gmane.comp.hardware.beagleboard.general/91 [2] Errata #7 at http://elinux.org/BeagleBoard#Errata Signed-off-by: Sanjeev Premi <premi@xxxxxx> Cc: Paul Walmsley <paul@xxxxxxxxx> --- * The patch has been boot tested with Beagleboard-XM. Verified that GPTIMER1 is indeed being used. * Browsing through the code, it appears that similar change could be applied for these boards: - devkit8000 - omap3stalker - omap3touchbook However, I don't have access to any of these; or information on their revisions. I can update this patch based on confirmations. arch/arm/mach-omap2/board-omap3beagle.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4b113b2..edc1596 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -509,7 +509,10 @@ static void __init omap3_beagle_init_irq(void) { omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); + if (omap3_beagle_version == OMAP3BEAGLE_BOARD_AXBX) + omap2_gp_clockevent_set_gptimer(12); + else + omap2_gp_clockevent_set_gptimer(1); #endif } -- 1.7.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
