[PATCHv3 5/6] OMAP3: Serial: Made serial to work properly with PRCM chain handler

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
 arch/arm/mach-omap2/pm34xx.c |   19 -------------------
 arch/arm/mach-omap2/serial.c |   40 +++++++++++++++++++++-------------------
 2 files changed, 21 insertions(+), 38 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ff0811a..6fff894 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -340,18 +340,9 @@ void omap_sram_idle(void)
 		omap3_enable_io_chain();
 	}
 
-	/* Block console output in case it is on one of the OMAP UARTs */
-	if (!is_suspending())
-		if (per_next_state < PWRDM_POWER_ON ||
-		    core_next_state < PWRDM_POWER_ON)
-			if (!console_trylock())
-				goto console_still_active;
-
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
-		omap_uart_prepare_idle(2);
-		omap_uart_prepare_idle(3);
 		omap2_gpio_prepare_for_idle(per_going_off);
 		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
@@ -359,8 +350,6 @@ void omap_sram_idle(void)
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		omap_uart_prepare_idle(0);
-		omap_uart_prepare_idle(1);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -407,8 +396,6 @@ void omap_sram_idle(void)
 			omap3_sram_restore_context();
 			omap2_sms_restore_context();
 		}
-		omap_uart_resume_idle(0);
-		omap_uart_resume_idle(1);
 		if (core_next_state == PWRDM_POWER_OFF)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
@@ -422,14 +409,8 @@ void omap_sram_idle(void)
 		omap2_gpio_resume_after_idle();
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
-		omap_uart_resume_idle(2);
-		omap_uart_resume_idle(3);
 	}
 
-	if (!is_suspending())
-		console_unlock();
-
-console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 1ac361b..e4a5a8c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -39,6 +39,7 @@
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/prcm.h>
 
 #include "prm2xxx_3xxx.h"
 #include "pm.h"
@@ -280,24 +281,34 @@ static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
 
 static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
 {
+	int locked;
+
 	if (uart->clocked)
 		return;
 
+	locked = console_trylock();
 	omap_device_enable(uart->pdev);
 	uart->clocked = 1;
 	omap_uart_restore_context(uart);
+	if (locked)
+		console_unlock();
 }
 
 #ifdef CONFIG_PM
 
 static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 {
+	int locked;
+
 	if (!uart->clocked)
 		return;
 
+	locked = console_trylock();
 	omap_uart_save_context(uart);
 	uart->clocked = 0;
 	omap_device_idle(uart->pdev);
+	if (locked)
+		console_unlock();
 }
 
 static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
@@ -380,6 +391,7 @@ static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 	omap_uart_smart_idle_enable(uart, 1);
 	uart->can_sleep = 1;
 	del_timer(&uart->timer);
+	omap_uart_disable_clocks(uart);
 }
 
 static void omap_uart_idle_timer(unsigned long data)
@@ -391,35 +403,23 @@ static void omap_uart_idle_timer(unsigned long data)
 
 void omap_uart_prepare_idle(int num)
 {
-	struct omap_uart_state *uart;
-
-	list_for_each_entry(uart, &uart_list, node) {
-		if (num == uart->num && uart->can_sleep) {
-			omap_uart_disable_clocks(uart);
-			return;
-		}
-	}
 }
 
 void omap_uart_resume_idle(int num)
 {
 	struct omap_uart_state *uart;
+	u32 wkst;
 
 	list_for_each_entry(uart, &uart_list, node) {
 		if (num == uart->num && uart->can_sleep) {
-			omap_uart_enable_clocks(uart);
+			omap_uart_block_sleep(uart);
 
-			/* Check for IO pad wakeup */
-			if (cpu_is_omap34xx() && uart->padconf) {
-				u16 p = omap_ctrl_readw(uart->padconf);
-
-				if (p & OMAP3_PADCONF_WAKEUPEVENT0)
-					omap_uart_block_sleep(uart);
+			/* Check for normal UART wakeup (and clear it) */
+			if (uart->wk_st && uart->wk_mask) {
+				wkst = __raw_readl(uart->wk_st) & uart->wk_mask;
+				if (wkst)
+					__raw_writel(wkst, uart->wk_st);
 			}
-
-			/* Check for normal UART wakeup */
-			if (__raw_readl(uart->wk_st) & uart->wk_mask)
-				omap_uart_block_sleep(uart);
 			return;
 		}
 	}
@@ -550,6 +550,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
 				   IRQF_SHARED, "serial idle", (void *)uart);
 	WARN_ON(ret);
+	ret = omap_prcm_register_pad_irq(uart->padconf, uart->irq);
+	WARN_ON(ret);
 }
 
 void omap_uart_enable_irqs(int enable)
-- 
1.7.4.1


Texas Instruments Oy, Tekniikantie 12, 02150 Espoo. Y-tunnus: 0115040-6. Kotipaikka: Helsinki
 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux