From: Mark Grosen <mgrosen@xxxxxx>
Add remoteproc implementation for da850, so we can boot its DSP.
Signed-off-by: Mark Grosen <mgrosen@xxxxxx>
Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
---
arch/arm/mach-davinci/include/mach/remoteproc.h | 28 +++++
drivers/remoteproc/Kconfig | 16 +++
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/davinci_remoteproc.c | 147 +++++++++++++++++++++++
4 files changed, 192 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-davinci/include/mach/remoteproc.h
create mode 100644 drivers/remoteproc/davinci_remoteproc.c
diff --git a/arch/arm/mach-davinci/include/mach/remoteproc.h b/arch/arm/mach-davinci/include/mach/remoteproc.h
new file mode 100644
index 0000000..af6e88c
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/remoteproc.h
@@ -0,0 +1,28 @@
+/*
+ * Remote Processor
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DAVINCI_REMOTEPROC_H
+#define _DAVINCI_REMOTEPROC_H
+
+#include <linux/remoteproc.h>
+
+struct davinci_rproc_pdata {
+ struct rproc_ops *ops;
+ char *name;
+ char *clk_name;
+ char *firmware;
+};
+
+#endif /* _DAVINCI_REMOTEPROC_H */
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 88421bd..1e594b5 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -26,3 +26,19 @@ config OMAP_REMOTE_PROC
It's safe to say n here if you're not interested in multimedia
offloading or just want a bare minimum kernel.
+
+config DAVINCI_REMOTE_PROC
+ tristate "Davinci remoteproc support"
+ depends on ARCH_DAVINCI_DA850
+ select REMOTE_PROC
+ default y
+ help
+ Say y here to support Davinci's DSP remote processor via the remote
+ processor framework (currently only da850 is supported).
+
+ Usually you want to say y here, in order to enable multimedia
+ use-cases to run on your platform (multimedia codecs are
+ offloaded to remote DSP processors using this framework).
+
+ It's safe to say n here if you're not interested in multimedia
+ offloading or just want a bare minimum kernel.
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 0198b1d..e83dac9 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_REMOTE_PROC) += remoteproc.o
obj-$(CONFIG_OMAP_REMOTE_PROC) += omap_remoteproc.o
+obj-$(CONFIG_DAVINCI_REMOTE_PROC) += davinci_remoteproc.o
diff --git a/drivers/remoteproc/davinci_remoteproc.c b/drivers/remoteproc/davinci_remoteproc.c
new file mode 100644
index 0000000..0e26fe9
--- /dev/null
+++ b/drivers/remoteproc/davinci_remoteproc.c
@@ -0,0 +1,147 @@
+/*
+ * Remote processor machine-specific module for Davinci
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/printk.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/da8xx.h>
+#include <mach/cputype.h>
+#include <mach/psc.h>
+#include <mach/remoteproc.h>
+
+/*
+ * Technical Reference:
+ * OMAP-L138 Applications Processor System Reference Guide
+ * http://www.ti.com/litv/pdf/sprugm7d
+ */
+
+/* local reset bit (0 is asserted) in MDCTL15 register (section 9.6.18) */
+#define LRST BIT(8)
+
+/* next state bits in MDCTL15 register (section 9.6.18) */
+#define NEXT_ENABLED 0x3
+
+/* register for DSP boot address in SYSCFG0 module (section 11.5.6) */
+#define HOST1CFG 0x44
+
+static inline int davinci_rproc_start(struct rproc *rproc, u64 bootaddr)
+{
+ struct device *dev = rproc->dev;
+ struct davinci_rproc_pdata *pdata = dev->platform_data;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *psc_base;
+ struct clk *dsp_clk;
+
+ /* hw requires the start (boot) address be on 1KB boundary */
+ if (bootaddr & 0x3ff) {
+ dev_err(dev, "invalid boot address: must be aligned to 1KB\n");
+ return -EINVAL;
+ }
+
+ dsp_clk = clk_get(dev, pdata->clk_name);
+ if (IS_ERR_OR_NULL(dsp_clk)) {
+ dev_err(dev, "clk_get error: %ld\n", PTR_ERR(dsp_clk));
+ return PTR_ERR(dsp_clk);
+ }
+
+ clk_enable(dsp_clk);
+ rproc->priv = dsp_clk;
+
+ psc_base = ioremap(soc_info->psc_bases[0], SZ_4K);
+
+ /* insure local reset is asserted before writing start address */
+ __raw_writel(NEXT_ENABLED, psc_base + MDCTL + 4 * DA8XX_LPSC0_GEM);
+
+ __raw_writel(bootaddr, DA8XX_SYSCFG0_VIRT(HOST1CFG));
+
+ /* de-assert local reset to start the dsp running */
+ __raw_writel(LRST | NEXT_ENABLED, psc_base + MDCTL +
+ 4 * DA8XX_LPSC0_GEM);
+
+ iounmap(psc_base);
+
+ return 0;
+}
+
+static inline int davinci_rproc_stop(struct rproc *rproc)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *psc_base;
+ struct clk *dsp_clk = rproc->priv;
+
+ psc_base = ioremap(soc_info->psc_bases[0], SZ_4K);
+
+ /* halt the dsp by asserting local reset */
+ __raw_writel(NEXT_ENABLED, psc_base + MDCTL + 4 * DA8XX_LPSC0_GEM);
+
+ clk_disable(dsp_clk);
+ clk_put(dsp_clk);
+
+ iounmap(psc_base);
+
+ return 0;
+}
+
+static struct rproc_ops davinci_rproc_ops = {
+ .start = davinci_rproc_start,
+ .stop = davinci_rproc_stop,
+};
+
+static int davinci_rproc_probe(struct platform_device *pdev)
+{
+ struct davinci_rproc_pdata *pdata = pdev->dev.platform_data;
+
+ return rproc_register(&pdev->dev, pdata->name, &davinci_rproc_ops,
+ pdata->firmware, NULL, THIS_MODULE);
+}
+
+static int __devexit davinci_rproc_remove(struct platform_device *pdev)
+{
+ struct davinci_rproc_pdata *pdata = pdev->dev.platform_data;
+
+ return rproc_unregister(pdata->name);
+}
+
+static struct platform_driver davinci_rproc_driver = {
+ .probe = davinci_rproc_probe,
+ .remove = __devexit_p(davinci_rproc_remove),
+ .driver = {
+ .name = "davinci-rproc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init davinci_rproc_init(void)
+{
+ return platform_driver_register(&davinci_rproc_driver);
+}
+module_init(davinci_rproc_init);
+
+static void __exit davinci_rproc_exit(void)
+{
+ platform_driver_unregister(&davinci_rproc_driver);
+}
+module_exit(davinci_rproc_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Davinci Remote Processor control driver");
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
