From: Charulatha V <charu@xxxxxx> Call runtime pm APIs pm_runtime_get_sync() and pm_runtime_put_sync() for enabling/disabling clocks appropriately. Remove syscore_ops and instead use dev_pm_ops now. Signed-off-by: Charulatha V <charu@xxxxxx> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@xxxxxx> --- drivers/gpio/gpio-omap.c | 100 ++++++++++++++++++++++++++++++++++++--------- 1 files changed, 80 insertions(+), 20 deletions(-) diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index ea984fd..f5bb469 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -80,6 +80,8 @@ struct gpio_bank { struct omap_gpio_reg_offs *regs; }; +static void omap_gpio_mod_init(struct gpio_bank *bank); + #define GPIO_INDEX(bank, gpio) (gpio % bank->width) #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio)) #define GPIO_MOD_CTRL_BIT BIT(0) @@ -492,6 +494,22 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); unsigned long flags; + /* + * If this is the first gpio_request for the bank, + * enable the bank module. + */ + if (!bank->mod_usage) { + if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) { + dev_err(bank->dev, "%s: GPIO bank %d " + "pm_runtime_get_sync failed\n", + __func__, bank->id); + return -EINVAL; + } + + /* Initialize the gpio bank registers to init time value */ + omap_gpio_mod_init(bank); + } + spin_lock_irqsave(&bank->lock, flags); /* Set trigger to none. You need to enable the desired trigger with @@ -548,6 +566,18 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) _reset_gpio(bank, bank->chip.base + offset); spin_unlock_irqrestore(&bank->lock, flags); + + /* + * If this is the last gpio to be freed in the bank, + * disable the bank module. + */ + if (!bank->mod_usage) { + if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) { + dev_err(bank->dev, "%s: GPIO bank %d " + "pm_runtime_put_sync failed\n", + __func__, bank->id); + } + } } /* @@ -572,6 +602,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); bank = irq_get_handler_data(irq); + + pm_runtime_get_sync(bank->dev); + isr_reg = bank->base + bank->regs->irqstatus; if (WARN_ON(!isr_reg)) @@ -640,6 +673,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) exit: if (!unmasked) chained_irq_exit(chip, desc); + + pm_runtime_put_sync(bank->dev); } static void gpio_irq_shutdown(struct irq_data *d) @@ -1120,12 +1155,25 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev) } pm_runtime_enable(bank->dev); - pm_runtime_get_sync(bank->dev); + pm_runtime_irq_safe(bank->dev); + if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) { + dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_get_sync " + "failed\n", __func__, bank->id); + iounmap(bank->base); + return -EINVAL; + } omap_gpio_mod_init(bank); omap_gpio_chip_init(bank); omap_gpio_show_rev(bank); + if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) { + dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_put_sync " + "failed\n", __func__, bank->id); + iounmap(bank->base); + return -EINVAL; + } + list_add_tail(&bank->node, &omap_gpio_list); return ret; @@ -1136,7 +1184,7 @@ err_exit: return ret; } -static int omap_gpio_suspend(void) +static int omap_gpio_suspend(struct device *dev) { struct gpio_bank *bank; @@ -1163,7 +1211,7 @@ static int omap_gpio_suspend(void) return 0; } -static void omap_gpio_resume(void) +static int omap_gpio_resume(struct device *dev) { struct gpio_bank *bank; @@ -1173,7 +1221,7 @@ static void omap_gpio_resume(void) unsigned long flags; if (!bank->suspend_support) - return; + return 0; wake_clear = bank->base + bank->regs->wkup_clear; wake_set = bank->base + bank->regs->wkup_set; @@ -1183,12 +1231,18 @@ static void omap_gpio_resume(void) __raw_writel(bank->saved_wakeup, wake_set); spin_unlock_irqrestore(&bank->lock, flags); } + return 0; } -static struct syscore_ops omap_gpio_syscore_ops = { - .suspend = omap_gpio_suspend, - .resume = omap_gpio_resume, -}; +static int omap_gpio_pm_runtime_suspend(struct device *dev) +{ + return 0; +} + +static int omap_gpio_pm_runtime_resume(struct device *dev) +{ + return 0; +} #ifdef CONFIG_ARCH_OMAP2PLUS @@ -1212,6 +1266,11 @@ void omap2_gpio_prepare_for_idle(int off_mode) if (!off_mode) continue; + if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) + dev_err(bank->dev, "%s: GPIO bank %d " + "pm_runtime_put_sync failed\n", + __func__, bank->id); + /* If going to OFF, remove triggering for all * non-wakeup GPIOs. Otherwise spurious IRQs will be * generated. See OMAP2420 Errata item 1.101. */ @@ -1252,6 +1311,11 @@ void omap2_gpio_resume_after_idle(void) if (!bank->loses_context) continue; + if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) + dev_err(bank->dev, "%s: GPIO bank %d " + "pm_runtime_get_sync failed\n", + __func__, bank->id); + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) clk_enable(bank->dbck); @@ -1366,10 +1430,18 @@ void omap_gpio_restore_context(struct gpio_bank *bank) } #endif +static const struct dev_pm_ops gpio_pm_ops = { + .runtime_suspend = omap_gpio_pm_runtime_suspend, + .runtime_resume = omap_gpio_pm_runtime_resume, + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + static struct platform_driver omap_gpio_driver = { .probe = omap_gpio_probe, .driver = { .name = "omap_gpio", + .pm = &gpio_pm_ops, }, }; @@ -1384,15 +1456,3 @@ static int __init omap_gpio_drv_reg(void) } postcore_initcall(omap_gpio_drv_reg); -static int __init omap_gpio_sysinit(void) -{ - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) - register_syscore_ops(&omap_gpio_syscore_ops); -#endif - - return 0; -} - -arch_initcall(omap_gpio_sysinit); -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html