From: Charulatha V <charu@xxxxxx>
The context lost count is modified in omap_sram_idle() path when
pwrdm_post_transition() is called. But pwrdm_post_transition() is called
only after omap_gpio_resume_after_idle() is called. Correct this so that
context lost count is modified before calling omap_gpio_resume_after_idle().
This would be useful when OMAP GPIO save/restore context is called by
the OMAP GPIO driver itself.
Signed-off-by: Charulatha V <charu@xxxxxx>
---
arch/arm/mach-omap2/pm34xx.c | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c155c9d..51d5a5c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -375,7 +375,6 @@ void omap_sram_idle(void)
printk(KERN_ERR "Invalid mpu state in sram_idle\n");
return;
}
- pwrdm_pre_transition();
/* NEON control */
if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
@@ -398,6 +397,8 @@ void omap_sram_idle(void)
if (!console_trylock())
goto console_still_active;
+ pwrdm_pre_transition();
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
@@ -467,6 +468,8 @@ void omap_sram_idle(void)
}
omap3_intc_resume_idle();
+ pwrdm_post_transition();
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
@@ -490,8 +493,6 @@ console_still_active:
omap3_disable_io_chain();
}
- pwrdm_post_transition();
-
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
}
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
