On Thu, Jun 9, 2011 at 2:09 AM, Jon Hunter <jon-hunter@xxxxxx> wrote: > Hi Govindraj, > > On 6/8/2011 6:23 AM, Govindraj.R wrote: > > [snip] > >> + >> +#define OMAP_UART_AUTOSUSPEND_DELAY (30 * HZ) /* Value is msecs */ > > [snip] > >> @@ -1295,18 +1381,36 @@ static int serial_omap_probe(struct >> platform_device *pdev) >> up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; >> } >> >> + pm_runtime_use_autosuspend(&pdev->dev); >> + pm_runtime_set_autosuspend_delay(&pdev->dev, >> + OMAP_UART_AUTOSUSPEND_DELAY); > > Something is weird here...DEFAULT_AUTOSUSPEND_DELAY is defined as (30*HZ) > which would appear to be jiffies (ticks per second) and NOT msecs. However, > pm_runtime_set_autosuspend is clearly expecting msecs. So this seems to > conflict. By default 30*HZ for omap would be 30*128 = 3840ms so not quite 4 > seconds. > > What were you intending here? Intention is to get approx 3 secs timeout for autosuspend. -- Thanks, Govindraj.R > > Cheers > Jon > -- > To unsubscribe from this list: send the line "unsubscribe linux-serial" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html