When runtime PM is disabled, device clocks need to be enabled on
device add and disabled on device remove. This currently is not
happening because in the !PM_RUNTIME case, no notifiers are registered
for OMAP1 devices.
Fix this by ensuring notifiers are registered, even in the !PM_RUNTIME case.
Reported-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
Tested-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxx>
---
Tony, this fix should go in for v3.0-rc as well.
If you haven't pulled my pm-fixes branch, you can pull
for_3.0/pm-fixes-2 instead which includes this patch on top
of the original pull request.
arch/arm/mach-omap1/Makefile | 4 ++--
arch/arm/mach-omap1/pm_bus.c | 8 ++++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index af98117..5b114d1 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,14 +4,14 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index fe31d93..334fb88 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = {
USE_PLATFORM_PM_SLEEP_OPS
},
};
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
- .pwr_domain = &default_power_domain,
+ .pwr_domain = OMAP1_PWR_DOMAIN,
.con_ids = { "ick", "fck", NULL, },
};
@@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
return 0;
}
core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
