On 06/07/11 11:01, Alexander Holler wrote: > Am 31.05.2011 12:29, schrieb Tony Lindgren: >> * Alexander Holler<holler@xxxxxxxxxxxxx> [110405 06:38]: >>> Without msecure beeing high it isn't possible to set (or start) >>> the RTC. >>> >>> Tested with a BeagleBoard C4. >> >> Adding this into fixes. >> >> Tony >> >>> Signed-off-by: Alexander Holler<holler@xxxxxxxxxxxxx> >>> --- >>> arch/arm/mach-omap2/board-omap3beagle.c | 3 +++ >>> 1 files changed, 3 insertions(+), 0 deletions(-) >>> >>> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c >>> index 46d814a..ebe3a7e 100644 >>> --- a/arch/arm/mach-omap2/board-omap3beagle.c >>> +++ b/arch/arm/mach-omap2/board-omap3beagle.c >>> @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) >>> usb_ehci_init(&ehci_pdata); >>> omap3beagle_flash_init(); >>> >>> + /* Ensure msecure is mux'd to be able to set the RTC. */ >>> + omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); >>> + >>> /* Ensure SDRC pins are mux'd for self-refresh */ >>> omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); >>> omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); >>> -- >>> 1.7.3.4 >>> > > I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. > > (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). > > --- > arch/arm/mach-omap2/board-omap3beagle.c | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c > index 33007fd..24b4417 100644 > --- a/arch/arm/mach-omap2/board-omap3beagle.c > +++ b/arch/arm/mach-omap2/board-omap3beagle.c > @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) > usbhs_init(&usbhs_bdata); > omap3beagle_flash_init(); > > + /* Ensure msecure is high to be able to set the RTC. */ > + omap_mux_init_signal("gpio_22", OMAP_PIN_OFF_OUTPUT_HIGH); > + gpio_request(22, "msecure"); > + gpio_direction_output(22, true); Can this be gpio_request_one() instead, please? Also, it will be nice to make a define for the magic 22. > + gpio_export(22, false); > + > /* Ensure SDRC pins are mux'd for self-refresh */ > omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); > omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html