[pm-wip/voltdm_nm][PATCH 04/10] OMAP4: PM: VC: allow channels use of default channel volt_reg_addr

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OMAP4's PRM_VC_CFG_CHANNEL register allows for flexibility of configuring
for various PMIC configurations. In combinations where we'd like to
use the default VC channel's voltage_reg address in a particular non-default
VC channel, we allow the use of USE_DEFAULT_CHANNEL_I2C_PARAM.

Since 0 is a valid register address, we need to increase the size of
reg storage for the flag. Depending on the PMIC and platform used,
this can be populated on the PMIC's datastructure and percolates to
VC's configuration.

Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
 arch/arm/mach-omap2/vc.c      |   17 ++++++++++-------
 arch/arm/mach-omap2/vc.h      |    2 +-
 arch/arm/mach-omap2/voltage.h |    4 ++--
 3 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 6017c70..53a16cc 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -310,10 +310,11 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	vc->setup_time = voltdm->pmic->volt_setup_time;
 
 	if ((vc->flags & OMAP_VC_CHANNEL_DEFAULT) &&
-		(vc->i2c_slave_addr == USE_DEFAULT_CHANNEL_I2C_PARAM)) {
+		((vc->i2c_slave_addr == USE_DEFAULT_CHANNEL_I2C_PARAM) ||
+		(vc->volt_reg_addr == USE_DEFAULT_CHANNEL_I2C_PARAM))) {
 		pr_err("%s: voltdm %s: default channel "
-			"bad config-sa=%2x ?\n", __func__, voltdm->name,
-			vc->i2c_slave_addr);
+			"bad config-sa=%2x vol=%2x?\n", __func__, voltdm->name,
+			vc->i2c_slave_addr, vc->volt_reg_addr);
 		return;
 	}
 
@@ -328,10 +329,12 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	/*
 	 * Configure the PMIC register addresses.
 	 */
-	voltdm->rmw(vc->smps_volra_mask,
-		    vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
-		    vc->common->smps_volra_reg);
-	vc->cfg_channel |= vc_cfg_bits->rav;
+	if (vc->volt_reg_addr != USE_DEFAULT_CHANNEL_I2C_PARAM) {
+		voltdm->rmw(vc->smps_volra_mask,
+			    vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
+			    vc->common->smps_volra_reg);
+		vc->cfg_channel |= vc_cfg_bits->rav;
+	}
 
 	if (vc->cmd_reg_addr) {
 		voltdm->rmw(vc->smps_cmdra_mask,
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index 22c0060..310368f 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -78,7 +78,7 @@ struct omap_vc_channel {
 
 	/* channel state */
 	u16 i2c_slave_addr;
-	u8 volt_reg_addr;
+	u16 volt_reg_addr;
 	u8 cmd_reg_addr;
 	u8 cfg_channel;
 	u16 setup_time;
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 1732258..75f3557 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -114,7 +114,7 @@ struct omap_volt_data {
  * channel is MPU, all other domains such as IVA/CORE, could optionally
  * link their i2c reg configuration to use MPU channel's configuration if
  * required. To do this, mark in the PMIC structure's
- * i2c_slave_addr with this macro.
+ * i2c_slave_addr, volt_reg_addr with this macro.
  */
 #define USE_DEFAULT_CHANNEL_I2C_PARAM  0x8000
 
@@ -142,7 +142,7 @@ struct omap_voltdm_pmic {
 	u8 vp_vddmax;
 	u8 vp_timeout_us;
 	u16 i2c_slave_addr;
-	u8 volt_reg_addr;
+	u16 volt_reg_addr;
 	u8 cmd_reg_addr;
 	bool i2c_high_speed;
 	u8 i2c_mcode;
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux