On Mon, May 30, 2011 at 09:38:10AM +0300, Tomi Valkeinen wrote: > On Fri, 2011-05-20 at 21:16 +0530, Avinash.H.M wrote: > > The sequence of _ocp_softreset doesn't work for i2c. The i2c module has a > > special sequence to reset the module. The sequence is > > - Disable the I2C. > > - Write to SOFTRESET bit. > > - Enable the I2C. > > - Poll on the RESETDONE bit. > > The sequence is implemented as a function and the i2c_class is updated with > > the correct 'reset' pointer. omap_hwmod_softreset function is implemented > > which triggers the softreset by writing into sysconfig register. On following > > this sequence, i2c module resets properly and timeouts are not seen. > > > > Cc: Rajendra Nayak <rnayak@xxxxxx> > > Cc: Paul Walmsley <paul@xxxxxxxxx> > > Cc: Benoit Cousson <b-cousson@xxxxxx> > > Cc: Kevin Hilman <khilman@xxxxxx> > > Signed-off-by: Avinash.H.M <avinashhm@xxxxxx> > > --- > > <snip> > > > diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h > > index 878d632..3ffb94e 100644 > > --- a/arch/arm/plat-omap/include/plat/i2c.h > > +++ b/arch/arm/plat-omap/include/plat/i2c.h > > @@ -23,6 +23,8 @@ > > > > #include <linux/i2c.h> > > > > +#include <plat/omap_hwmod.h> > > + > > #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) > > extern int omap_register_i2c_bus(int bus_id, u32 clkrate, > > struct i2c_board_info const *info, > > @@ -52,4 +54,6 @@ struct omap_i2c_dev_attr { > > void __init omap1_i2c_mux_pins(int bus_id); > > void __init omap2_i2c_mux_pins(int bus_id); > > > > +int omap_i2c_reset(struct omap_hwmod *oh); > > + > > It's not necessary to include omap_hwmod.h, just declare > > struct omap_hwmod; Hi Tomi , I agree to the comment, since it is a header file (i2c.h), no need to include hwmod.h. I ll drop the file inclusion. Thanks for reviewing. B R , - Avinash > > Tomi > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html