On 5/26/2011 11:23 AM, Premi, Sanjeev wrote:
From: linux-omap-owner@xxxxxxxxxxxxxxx
[mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of
DebBarma, Tarun Kanti
Sent: Tuesday, May 24, 2011 7:55 PM
From: Charulatha V<charu@xxxxxx>
Non-wakeup GPIOs are available only in OMAP2420 and OMAP3430. But
the GPIO driver initializes the non-wakeup GPIO bits for OMAP24xx
(bothe OMAP 2420 and 2430)& not for OMAP3 which is incorrect.
Fix the above by providing non-wakeup GPIO information through pdata
specific to the SoC.
The GPIO rev id provided in the hwmod database is the same
for OMAP2420
and OMAP2430. Change the GPIO rev ids in hwmod database as given below
so that it can be used to identify OMAP2420 and OMAP2430.
OMAP2420 - 0
OMAP2430 - 1
OMAP3 - 2
OMAP4 - 3
[sp] Magic numbers should be avoided.
Suggest using something like:
#define GPIO_REV_2420 0
#define GPIO_REV_2430 1
#define GPIO_REV_34XX 2
#define GPIO_REV_44xx 3
Well, it is not a magic number, it is a revision id that is incremented
each time there is a difference in the IP.
The OMAP version -> IP version link is done at hwmod level. The driver
does not have to know it is an OMAP3 or OMAP4. In that case we did
change the IP version for every revisions, but OMAP5 will use the OMAP4
revision.
I'm not even considering all the Davinci variants that are not named
OMAP but do use OMAP IPs... as you already know...
That can provide a rather confusing information for my point of view.
Whereas a comment like that will give you the exhaustive information.
0: OMAP2420
1: OMAP2430
2: OMAP3, DMxxx
3: OMAP4, OMAP5, DM816x
That being said, some drivers already did that, so I'm not opposed to
such change. I just think it is not the best approach.
At least it gives a pointer to the TRM that contains the IP doc.
We don't have to refer back to this comment while reading the code.
I also believed that HWMODs were auto generated.
Can the changes to structures in this patch recreated using current
scripts?
Only OMAP4 & 5 are generated today, and in anycase this information is
some custom data added by driver owner. So we just have to update that
information.
I cannot really use the real HW IP version because it is irrelevant most
of the time. Maybe in the future we will be able to force the HW team to
provide relevant data in that field :-)
Regards,
Benoit
~sanjeev
Signed-off-by: Charulatha V<charu@xxxxxx>
Cc: Cousson, Benoit<b-cousson@xxxxxx>
Cc: Paul Walmsley<paul@xxxxxxxxx>
---
arch/arm/mach-omap2/gpio.c | 26
++++++++++++++++++++++++--
arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +-
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +-
arch/arm/plat-omap/include/plat/gpio.h | 1 +
drivers/gpio/gpio_omap.c | 11 +++--------
6 files changed, 31 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 0446bd1..6cd26b4 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -56,6 +56,28 @@ static int omap2_gpio_dev_init(struct
omap_hwmod *oh, void *unused)
return -ENOMEM;
}
+ switch (oh->class->rev) {
+ case 0:
+ if (id == 1)
+ /* non-wakeup GPIO pins for OMAP2420 Bank1 */
+ pdata->non_wakeup_gpios = 0xe203ffc0;
+ else if (id == 2)
+ /* non-wakeup GPIO pins for OMAP2420 Bank2 */
+ pdata->non_wakeup_gpios = 0x08700040;
+ break;
+ case 2:
+ if (id == 2)
+ /* non-wakeup GPIO pins for OMAP3 Bank2 */
+ pdata->non_wakeup_gpios = 0x00000001;
+ else if (id == 6)
+ /* non-wakeup GPIO pins for OMAP3 Bank6 */
+ pdata->non_wakeup_gpios = 0x08000000;
+ break;
[sp] Where is the description on non-wakeup GPIOs in OMAP3?
Here is text from AM37x TRM:
[quote ...only relevant text]
Each GPIO module provides 32 dedicated general-purpose pins with input
and output capabilities; .... These pins can be configured for the
following applications:
- Data input (capture)/output (drive)
- Keyboard interface with a debounce cell
- Interrupt generation in ....
- Wake-up request generation in idle mode
[/quote]
Otherwise, what are the GPIO2_WAKEUPENABLE (0x4905 0020) and
GPIO6_WAKEUPENABLE (0x4905 8020) meant for?
+ default:
+ /* No non-wakeup GPIO pins for other SoCs */
+ break;
+ }
+
~sanjeev
[snip]...[snip]
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
