Re: [PATCH v3 1/2] REGULATOR: TWL6025: add support to twl-regulator

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 19, 2011 at 12:02 AM, Graeme Gregory <gg@xxxxxxxxxxxxxxx> wrote:
> Adding support for the twl6025. Major difference in the twl6025 is the
> group functionality has been removed from the chip so this affects how
> regulators are enabled and disabled.
>
> The names of the regulators also changed.
>
> The DCDCs of the 6025 are software controllable as well.
>
> Since V1
>
> Use the features variable passed via platform data instead of calling
> global function.
>
> Change the very switch like if statements to be a more readable
> switch statement.
>
> Since V2
>
> twl6025 doesn't use remap so remove it from the macros.
>
> Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
> ---
>  drivers/regulator/twl-regulator.c |  410 +++++++++++++++++++++++++++++++++---
>  1 files changed, 375 insertions(+), 35 deletions(-)
>

<snip>

> +
> +static int twl6030dcdc_list_voltage(struct regulator_dev *rdev, unsigned index)
> +{
> +       struct twlreg_info      *info = rdev_get_drvdata(rdev);
> +
> +       int voltage = 0;
> +
> +       switch (info->flags) {
> +       case 0:
> +               switch (index) {
> +               case 0:
> +                       voltage = 0;
> +                       break;
> +               case 58:

Not sure if hex 0x3A is better here, TRM gives in binary though.

> +                       voltage = 1350 * 1000;
> +                       break;
> +               case 59:
> +                       voltage = 1500 * 1000;
> +                       break;
> +               case 60:
> +                       voltage = 1800 * 1000;
> +                       break;
> +               case 61:
> +                       voltage = 1900 * 1000;
> +                       break;
> +               case 62:
> +                       voltage = 2100 * 1000;
> +                       break;
> +               default:
> +                       voltage = (600000 + (12500 * (index - 1)));
> +               }
> +               break;
> +       case DCDC_OFFSET_EN:
> +               switch (index) {
> +               case 0:
> +                       voltage = 0;
> +                       break;
> +               case 58:
> +                       voltage = 1350 * 1000;
> +                       break;
> +               case 59:
> +                       voltage = 1500 * 1000;
> +                       break;
> +               case 60:
> +                       voltage = 1800 * 1000;
> +                       break;
> +               case 61:
> +                       voltage = 1900 * 1000;
> +                       break;
> +               case 62:
> +                       voltage = 2100 * 1000;
> +                       break;
> +               default:
> +                       voltage = (700000 + (12500 * (index - 1)));

Between DCDC_OFFSET_EN and case 0
700000 and 600000 is the only difference,
can it be handled via additional 100000 in case DCDC_OFFSET_EN?
like
+	case DCDC_OFFSET_EN:
	voltage = 100000;
	/* fall through */
+	case 0:
	voltage += (600000 + (12500 * (index - 1)));

> +               }
> +               break;
> +       case DCDC_EXTENDED_EN:
> +               switch (index) {
> +               case 0:
> +                       voltage = 0;
> +                       break;
> +               case 58:
> +                       voltage = 2084 * 1000;
> +                       break;
> +               case 59:
> +                       voltage = 2315 * 1000;
> +                       break;
> +               case 60:
> +                       voltage = 2778 * 1000;
> +                       break;
> +               case 61:
> +                       voltage = 2932 * 1000;
> +                       break;
> +               case 62:
> +                       voltage = 3241 * 1000;
> +                       break;
> +               default:
> +                       voltage = (1852000 + (38600 * (index - 1)));
> +               }
> +               break;
> +       case DCDC_OFFSET_EN|DCDC_EXTENDED_EN:

space between |

> +               switch (index) {

> +
> +static int
> +twl6030dcdc_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
> +                       unsigned int *selector)
> +{
> +       struct twlreg_info      *info = rdev_get_drvdata(rdev);
> +       int     vsel = 0;
> +
> +       switch (info->flags) {
> +       case 0:
> +               if (min_uV == 0)
> +                       vsel = 0;
> +               else if ((min_uV >= 600000) && (max_uV <= 1300000)) {
> +                       vsel = (min_uV - 600000) / 125;
> +                       if (vsel % 100)
> +                               vsel += 100;
> +                       vsel /= 100;
> +                       vsel++;
> +               }
> +               /* Values 1..57 for vsel are linear and can be calculated
> +                * values 58..62 are non linear.
> +                */
> +               else if ((min_uV > 1900000) && (max_uV >= 2100000))
> +                       vsel = 62;
> +               else if ((min_uV > 1800000) && (max_uV >= 1900000))
> +                       vsel = 61;
> +               else if ((min_uV > 1500000) && (max_uV >= 1800000))
> +                       vsel = 60;
> +               else if ((min_uV > 1350000) && (max_uV >= 1500000))
> +                       vsel = 59;
> +               else if ((min_uV > 1300000) && (max_uV >= 1350000))
> +                       vsel = 58;
> +               else
> +                       return -EINVAL;
> +               break;
> +       case DCDC_OFFSET_EN:
> +               if (min_uV == 0)
> +                       vsel = 0;
> +               else if ((min_uV >= 700000) && (max_uV <= 1420000)) {
> +                       vsel = (min_uV - 600000) / 125;

s/600000/700000 ?

> +                       if (vsel % 100)
> +                               vsel += 100;
> +                       vsel /= 100;
> +                       vsel++;
> +               }

> +static struct regulator_ops twldcdc_ops = {
> +       .list_voltage           = twl6030dcdc_list_voltage,
> +
> +       .set_voltage            = twl6030dcdc_set_voltage,
> +       .get_voltage_sel        = twl6030dcdc_get_voltage_sel,

In 6030 TRM, dcdc is mentioned as SMPS
Is it different it in 6025 TRM?
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux