This patch adds a basic nand support for the omap3evm. Signed-off-by: Bryan DE FARIA <bdefaria@xxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/board-omap3evm.c | 38 ++++++++++++++++++++++++++++++++++ 1 files changed, 38 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5066b0b..6b5b5e1 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -30,6 +30,8 @@ #include <linux/usb/otg.h> #include <linux/smsc911x.h> +#include <linux/mtd/nand.h> + #include <linux/wl12xx.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> @@ -46,6 +48,7 @@ #include <plat/mcspi.h> #include <plat/display.h> #include <plat/panel-generic-dpi.h> +#include <plat/nand.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -69,6 +72,8 @@ #define OMAP3EVM_GEN1_ETHR_GPIO_RST 64 #define OMAP3EVM_GEN2_ETHR_GPIO_RST 7 +#define NAND_BLOCK_SIZE SZ_128K + static u8 omap3_evm_version; u8 get_omap3_evm_rev(void) @@ -315,6 +320,37 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; +static struct mtd_partition omap3evm_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + static struct regulator_consumer_supply omap3evm_vmmc1_supply = { .supply = "vmmc", }; @@ -766,6 +802,8 @@ static void __init omap3_evm_init(void) usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions)); omap3evm_init_smsc911x(); omap3_evm_display_init(); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html