[PATCH] OMAP3: set the core dpll clk rate in its set_rate function.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The debug l3_ick/rate is not displaying the actual rate of the clock in
hardware. This is because, the core dpll set_rate function doesn't update the
clk.rate. After fixing, the l3_ick/rate is displaying proper values.

Signed-off-by: Shweta Gulati <shweta.gulati@xxxxxx>
Signed-off-by: Avinash.H.M <avinashhm@xxxxxx>
Cc: Rajendra Nayak <rnayak@xxxxxx>
Cc: Paul Wamsley <paul@xxxxxxxxx>
---
* The patch is based on v2.6.39-rc6
* The patch is tested on zoom3.
* The patch is based on discussions from 
  http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg48518.html

 arch/arm/mach-omap2/clkt34xx_dpll3m2.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index b10d9ef..2a77faf 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -118,6 +118,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
 				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
 				  0, 0, 0, 0);
+	clk->rate = rate;
 
 	return 0;
 }
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux