Re: [PATCH] omap: usbhs: Fixed the crash during rmmod of ehci and ohci

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, May 09, 2011 at 02:40:03PM +0530, Keshava Munegowda wrote:
> From: Keshava Munegowda <Keshava_mgowda@xxxxxx>
> 
> the disabling of clocks and freeing GPIO are changed
> to fix the occurence of the crash of rmmod of ehci and ohci
> drivers
> 
> Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>

NAK

> ---
>  drivers/mfd/omap-usb-host.c |   24 ++++++++++++++++--------
>  1 files changed, 16 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 3ab9ffa..cda0797 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -939,6 +939,7 @@ static void usbhs_disable(struct device *dev)
>  	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
>  	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
>  	unsigned long			flags = 0;
> +	unsigned int			halt = 0;

you shouldn't need this.

> @@ -994,24 +995,31 @@ static void usbhs_disable(struct device *dev)
>  			dev_dbg(dev, "operation timed out\n");
>  	}
>  
> -	if (pdata->ehci_data->phy_reset) {
> -		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
> -			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
> -
> -		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
> -			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
> +	if (is_omap_usbhs_rev2(omap)) {
> +		if (is_ehci_tll_mode(pdata->port_mode[0]))
> +			clk_enable(omap->usbtll_p1_fck);
> +		if (is_ehci_tll_mode(pdata->port_mode[1]))
> +			clk_enable(omap->usbtll_p2_fck);
> +		clk_disable(omap->utmi_p2_fck);
> +		clk_disable(omap->utmi_p1_fck);
>  	}
>  
> -	clk_disable(omap->utmi_p2_fck);
> -	clk_disable(omap->utmi_p1_fck);
>  	clk_disable(omap->usbtll_ick);
>  	clk_disable(omap->usbtll_fck);
>  	clk_disable(omap->usbhost_fs_fck);
>  	clk_disable(omap->usbhost_hs_fck);
>  	clk_disable(omap->usbhost_ick);
> +	halt = 1;

at least from this diff, you're always reaching that part of the code
rendering this halt flag useless.

-- 
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux