Re: [PATCH 3/6] OMAP: 2420SDP: Port the display driver to new DSS2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomi,

On 05/09/11 10:36, Tomi Valkeinen wrote:

> Port the old omapfb panel driver to DSS2. This patch changes the board
> file only, the driver is ported in separate patch.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Cc: Hunyue Yau <hyau@xxxxxxxxxx>
> ---
>  arch/arm/mach-omap2/board-2430sdp.c |   84 +++++++++++++++++++++++++++++------
>  1 files changed, 70 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
> index 1fa6bb8..9b6e987 100644
> --- a/arch/arm/mach-omap2/board-2430sdp.c
> +++ b/arch/arm/mach-omap2/board-2430sdp.c
> @@ -38,6 +38,8 @@
>  #include <plat/gpmc.h>
>  #include <plat/usb.h>
>  #include <plat/gpmc-smc91x.h>
> +#include <plat/display.h>
> +#include <plat/panel-generic-dpi.h>
>  
>  #include "mux.h"
>  #include "hsmmc.h"
> @@ -98,20 +100,79 @@ static struct platform_device sdp2430_flash_device = {
>  	.resource	= &sdp2430_flash_resource,
>  };
>  
> -static struct platform_device sdp2430_lcd_device = {
> -	.name		= "sdp2430_lcd",
> -	.id		= -1,
> -};
> -
>  static struct platform_device *sdp2430_devices[] __initdata = {
>  	&sdp2430_flash_device,
> +};
> +
> +/* LCD */
> +#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
> +#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
> +
> +static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
> +{
> +	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
> +	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
> +
> +	return 0;
> +}
> +
> +static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
> +{
> +	gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
> +	gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
> +}
> +
> +static struct panel_generic_dpi_data sdp2430_panel_data = {
> +	.name			= "2430sdp",
> +	.platform_enable	= sdp2430_panel_enable_lcd,
> +	.platform_disable	= sdp2430_panel_disable_lcd,
> +};
> +
> +static struct omap_dss_device sdp2430_lcd_device = {
> +	.name			= "lcd",
> +	.driver_name		= "generic_dpi_panel",
> +	.type			= OMAP_DISPLAY_TYPE_DPI,
> +	.phy.dpi.data_lines	= 16,
> +	.data			= &sdp2430_panel_data,
> +};
> +
> +static struct omap_dss_device *sdp2430_dss_devices[] = {
>  	&sdp2430_lcd_device,
>  };
>  
> -static struct omap_lcd_config sdp2430_lcd_config __initdata = {
> -	.ctrl_name	= "internal",
> +static struct omap_dss_board_info sdp2430_dss_data = {
> +	.num_devices	= ARRAY_SIZE(sdp2430_dss_devices),
> +	.devices	= sdp2430_dss_devices,
> +	.default_device	= &sdp2430_lcd_device,
>  };
>  
> +static void __init sdp2430_display_init(void)
> +{
> +	int r;
> +
> +	r = gpio_request_one(SDP2430_LCD_PANEL_ENABLE_GPIO,
> +			GPIOF_OUT_INIT_LOW, "LCD reset");
> +	if (r) {
> +		printk(KERN_ERR "failed to get LCD reset GPIO\n");
> +		goto err0;
> +	}
> +
> +	r = gpio_request_one(SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
> +			GPIOF_OUT_INIT_LOW, "LCD Backlight");
> +	if (r) {
> +		printk(KERN_ERR "failed to get LCD backlight GPIO\n");

can both printks be pr_err?

> +		goto err1;
> +	}
> +
> +	omap_display_init(&sdp2430_dss_data);
> +
> +	return;
> +err1:
> +	gpio_free(SDP2430_LCD_PANEL_ENABLE_GPIO);
> +err0:
> +	return;
> +}

I think using gpio_request_array() will be much cleaner here...

> +
>  #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
>  
>  static struct omap_smc91x_platform_data board_smc91x_data = {
> @@ -136,10 +197,6 @@ static inline void board_smc91x_init(void)
>  
>  #endif
>  
> -static struct omap_board_config_kernel sdp2430_config[] __initdata = {
> -	{OMAP_TAG_LCD, &sdp2430_lcd_config},
> -};
> -
>  static void __init omap_2430sdp_init_early(void)
>  {
>  	omap2_init_common_infrastructure();
> @@ -244,9 +301,6 @@ static void __init omap_2430sdp_init(void)
>  
>  	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
>  
> -	omap_board_config = sdp2430_config;
> -	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
> -
>  	omap2430_i2c_init();
>  
>  	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
> @@ -263,6 +317,8 @@ static void __init omap_2430sdp_init(void)
>  	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
>  	if (ret == 0)
>  		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
> +
> +	sdp2430_display_init();
>  }
>  
>  static void __init omap_2430sdp_map_io(void)

-- 
Regards,
Igor.

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux