[...] > > This series is a first pass at the #ifdef removal cleanup. > > To demonstrate the type of changes needed for the cleanup, the > direction and data input/output functions are handled first. Register > offset fields are added to platform_data so #ifdefs can be removed. > > Similar needs to be done for the remaining #ifdefs. > > Currently boot tested on 3430/n900 only. Tested following on OMAP2420, OMAP2430, OMAP4430: -> request/free of gpio lines -> configure input/output mode -> interrupt configuration -> read/write -- Tarun > > Series applies to v2.6.39-rc4. > > Kevin Hilman (2): > OMAP: GPIO: move register offset defines into gpio.h > OMAP: GPIO: consolidate direction, input, output, remove #ifdefs > > arch/arm/mach-omap1/gpio15xx.c | 7 + > arch/arm/mach-omap1/gpio16xx.c | 15 ++ > arch/arm/mach-omap1/gpio7xx.c | 15 ++ > arch/arm/mach-omap2/gpio.c | 10 + > arch/arm/plat-omap/gpio.c | 328 +++------------------------ > ---- > arch/arm/plat-omap/include/plat/gpio.h | 111 +++++++++++ > 6 files changed, 190 insertions(+), 296 deletions(-) > > -- > 1.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
