Re: [PATCH] OMAP4: clockdomain: Follow recommended enable sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/21/2011 1:12 AM, Paul Walmsley wrote:

Hi Rajendra, Santosh,

just FYI I just observed this happening without the clockdomain patch, and
tracked this down.  It seems that there is an intermittent
problem with the OMAP L3 bus code.  On the 35xx BeagleBoard here, it
occasionally hangs after powerup:

[    0.810119] OMAP GPIO hardware version 2.5
[    0.815368] OMAP GPIO hardware version 2.5
[    0.820465] OMAP GPIO hardware version 2.5
[    0.825531] OMAP GPIO hardware version 2.5
[    0.830657] OMAP GPIO hardware version 2.5
[    0.835784] OMAP GPIO hardware version 2.5
[    0.840881] initcall omap_gpio_drv_reg+0x0/0xc returned 0 after 38146
usecs
[    0.848358] calling  bdi_class_init+0x0/0x50 @ 1
[    0.854003] initcall bdi_class_init+0x0/0x50 returned 0 after 0 usecs
[    0.860870] calling  kobject_uevent_init+0x0/0x20 @ 1
[    0.866363] initcall kobject_uevent_init+0x0/0x20 returned 0 after 0
usecs
[    0.873626] calling  gpiolib_sysfs_init+0x0/0x98 @ 1
[    0.885894] initcall gpiolib_sysfs_init+0x0/0x98 returned 0 after 0
usecs
[    0.893157] calling  lcd_class_init+0x0/0x58 @ 1
[    0.898742] initcall lcd_class_init+0x0/0x58 returned 0 after 0 usecs
[    0.905731] calling  backlight_class_init+0x0/0x70 @ 1
[    0.911834] initcall backlight_class_init+0x0/0x70 returned 0 after 0
usecs
[    0.919219] calling  tty_class_init+0x0/0x3c @ 1
[    0.924743] initcall tty_class_init+0x0/0x3c returned 0 after 0 usecs
[    0.931610] calling  vtconsole_class_init+0x0/0xe4 @ 1
[    0.938812] initcall vtconsole_class_init+0x0/0xe4 returned 0 after
7629 usecs
[    0.946472] calling  wakeup_sources_debugfs_init+0x0/0x3c @ 1
[    0.952606] initcall wakeup_sources_debugfs_init+0x0/0x3c returned 0
after 0 usecs
[    0.960571] calling  spi_init+0x0/0x88 @ 1
[    0.966247] initcall spi_init+0x0/0x88 returned 0 after 0 usecs
[    0.972564] calling  i2c_init+0x0/0x70 @ 1
[    0.978485] initcall i2c_init+0x0/0x70 returned 0 after 0 usecs
[    0.984832] calling  omap3_l3_init+0x0/0x14 @ 1

Will have a look at it
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux