From: Charulatha V <charu@xxxxxx>
In omap3, save/restore context is implemented for GPIO
banks 2-6 as GPIO bank1 is in wakeup domain. Instead
of identifying bank's power domain by bank id, make use
of a flag "losses_context" which is filled by
pwrdm_can_ever_lose_context() during dev_init.
For getting the powerdomain pointer, omap_hwmod_get_pwrdm()
is used. omap_device_get_pwrdm() could not be used as the
pwrdm information needs to be filled in pdata, whereas
omap_device_get_pwrdm() could be used only after
omap_device_build() call.
Signed-off-by: Charulatha V <charu@xxxxxx>
---
arch/arm/mach-omap2/gpio.c | 6 ++++++
arch/arm/plat-omap/gpio.c | 31 ++++++++++++++++++++-----------
arch/arm/plat-omap/include/plat/gpio.h | 1 +
3 files changed, 27 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9529842..1f1c604 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,6 +24,8 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
+#include "powerdomain.h"
+
static struct omap_device_pm_latency omap_gpio_latency[] = {
[0] = {
.deactivate_func = omap_device_idle_hwmods,
@@ -39,6 +41,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
int id;
+ struct powerdomain *pwrdm;
/*
* extract the device id from name field available in the
@@ -75,6 +78,9 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
return -EINVAL;
}
+ pwrdm = omap_hwmod_get_pwrdm(oh);
+ pdata->looses_context = pwrdm_can_ever_lose_context(pwrdm);
+
od = omap_device_build(name, id - 1, oh, pdata,
sizeof(*pdata), omap_gpio_latency,
ARRAY_SIZE(omap_gpio_latency),
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index c8736b0..74085b5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -172,6 +172,7 @@ struct gpio_bank {
struct device *dev;
bool dbck_flag;
int stride;
+ bool looses_context;
};
/*
@@ -1711,6 +1712,7 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
bank->dbck_flag = pdata->dbck_flag;
bank->stride = pdata->bank_stride;
bank_width = pdata->bank_width;
+ bank->looses_context = pdata->looses_context;
spin_lock_init(&bank->lock);
@@ -1856,16 +1858,15 @@ static int workaround_enabled;
void omap2_gpio_prepare_for_idle(int off_mode)
{
int i, c = 0;
- int min = 0;
- if (cpu_is_omap34xx())
- min = 1;
-
- for (i = min; i < gpio_bank_count; i++) {
+ for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l1 = 0, l2 = 0;
int j;
+ if (!bank->looses_context)
+ continue;
+
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_disable(bank->dbck);
@@ -1925,15 +1926,15 @@ void omap2_gpio_prepare_for_idle(int off_mode)
void omap2_gpio_resume_after_idle(void)
{
int i;
- int min = 0;
- if (cpu_is_omap34xx())
- min = 1;
- for (i = min; i < gpio_bank_count; i++) {
+ for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
u32 l = 0, gen, gen0, gen1;
int j;
+ if (!bank->looses_context)
+ continue;
+
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
clk_enable(bank->dbck);
@@ -2028,8 +2029,12 @@ void omap_gpio_save_context(void)
int i;
/* saving banks from 2-6 only since GPIO1 is in WKUP */
- for (i = 1; i < gpio_bank_count; i++) {
+ for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
+
+ if (!bank->looses_context)
+ continue;
+
bank->context.irqenable1 =
__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
bank->context.irqenable2 =
@@ -2058,8 +2063,12 @@ void omap_gpio_restore_context(void)
{
int i;
- for (i = 1; i < gpio_bank_count; i++) {
+ for (i = 0; i < gpio_bank_count; i++) {
struct gpio_bank *bank = &gpio_bank[i];
+
+ if (!bank->looses_context)
+ continue;
+
__raw_writel(bank->context.irqenable1,
bank->base + OMAP24XX_GPIO_IRQENABLE1);
__raw_writel(bank->context.irqenable2,
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index cac2e8a..15aeb71 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -77,6 +77,7 @@ struct omap_gpio_platform_data {
int bank_width; /* GPIO bank width */
int bank_stride; /* Only needed for omap1 MPUIO */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+ bool looses_context; /* whether the bank would ever loose context */
};
/* TODO: Analyze removing gpio_bank_count usage from driver code */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
