The saving of CCR.CM_AUTOIDLE_PLL is done in scratchpad area. However, in current code, the saving is done for CM_AUTOIDLE2_PLL (offset 0x34) instead of CM_AUTOIDLE_PLL (offset 0x30). This patch changes the code to save the correct register. Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx> --- arch/arm/mach-omap2/control.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 6952794..df0c75c 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -317,7 +317,7 @@ void omap3_save_scratchpad_contents(void) prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = -- 1.7.5-rc1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
