Panel Taal is a DSI panel connected to the DSI1 lanes on 4430sdp and Blaze. Add omap_dss_device struct for Panel Taal in the 4430sdp board file. This represents the primary lcd device on 4430sdp board and Blaze board. The following things are done: -Add regulator consumers (vdds_dsi) for the VCXIO supply. VCXIO on blaze and 4430sdp is a regulator supply for dsi, csi2, usb otg, and the DPLLs of mpu, iva and audio core. Since VCXIO has no consumers declared and the mpu's DPLL is also powered by it, set the always_on flag for the regulator so that VCXIO is never shut off accidentally. -Remove dummy lcd platform_device. -Add dsi_set_backlight() routine, original routine was written by Vikram Pandita. -Mux settings for DSI1 lanes, GPIO initialisations for Taal reset and Backlight. Signed-off-by: Archit Taneja <archit@xxxxxx> --- Note: Can be tested with the tree: http://gitorious.org/~boddob/linux-omap-dss2/archit-dss2-clone arch/arm/mach-omap2/board-4430sdp.c | 132 +++++++++++++++++++++++++++++++--- 1 files changed, 120 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index f5fcc5f..045c0be 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -37,6 +37,7 @@ #include <plat/mmc.h> #include <plat/omap4-keypad.h> #include <plat/display.h> +#include <plat/nokia-dsi-panel.h> #include "mux.h" #include "hsmmc.h" @@ -50,6 +51,11 @@ #define OMAP4_SFH7741_ENABLE_GPIO 188 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define LCD_BL_GPIO 27 /* LCD Backlight GPIO */ +/* PWM2 and TOGGLE3 register offsets */ +#define LED_PWM2ON 0x03 +#define LED_PWM2OFF 0x04 +#define TWL6030_TOGGLE3 0x92 static const int sdp4430_keymap[] = { KEY(0, 0, KEY_E), @@ -306,24 +312,13 @@ error1: return status; } -static struct platform_device sdp4430_lcd_device = { - .name = "sdp4430_lcd", - .id = -1, -}; - static struct platform_device *sdp4430_devices[] __initdata = { - &sdp4430_lcd_device, &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, }; -static struct omap_lcd_config sdp4430_lcd_config __initdata = { - .ctrl_name = "internal", -}; - static struct omap_board_config_kernel sdp4430_config[] __initdata = { - { OMAP_TAG_LCD, &sdp4430_lcd_config }, }; static void __init omap_4430sdp_init_early(void) @@ -377,6 +372,10 @@ static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { .dev_name = "omap_hsmmc.0", }, }; +static struct regulator_consumer_supply sdp4430_vcxio_supply[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; static int omap4_twl6030_hsmmc_late_init(struct device *dev) { @@ -523,7 +522,10 @@ static struct regulator_init_data sdp4430_vcxio = { | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .always_on = true, }, + .num_consumer_supplies = ARRAY_SIZE(sdp4430_vcxio_supply), + .consumer_supplies = sdp4430_vcxio_supply, }; static struct regulator_init_data sdp4430_vdac = { @@ -623,6 +625,73 @@ static void __init omap_sfh7741prox_init(void) } } +static int dsi1_panel_set_backlight(struct omap_dss_device *dssdev, int level) +{ + int r; + + r = twl_i2c_write_u8(TWL_MODULE_PWM, 0x7F, LED_PWM2OFF); + if (r) + return r; + + if (level > 1) { + if (level == 255) + level = 0x7F; + else + level = (~(level/2)) & 0x7F; + + r = twl_i2c_write_u8(TWL_MODULE_PWM, level, LED_PWM2ON); + if (r) + return r; + r = twl_i2c_write_u8(TWL6030_MODULE_ID1, 0x30, TWL6030_TOGGLE3); + if (r) + return r; + } else if (level <= 1) { + r = twl_i2c_write_u8(TWL6030_MODULE_ID1, 0x08, TWL6030_TOGGLE3); + if (r) + return r; + r = twl_i2c_write_u8(TWL6030_MODULE_ID1, 0x28, TWL6030_TOGGLE3); + if (r) + return r; + r = twl_i2c_write_u8(TWL6030_MODULE_ID1, 0x00, TWL6030_TOGGLE3); + if (r) + return r; + } + + return 0; +} + +static struct nokia_dsi_panel_data dsi1_panel; + +static void sdp4430_lcd_init(void) +{ + u32 reg; + int status; + + /* Enable DSI1 Lanes */ + reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); + reg |= OMAP4_DSI1_PIPD_MASK | OMAP4_DSI1_LANEENABLE_MASK; + omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY); + + /* Panel Taal reset and backlight GPIO init */ + status = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT, + "lcd_reset_gpio"); + if (status) + pr_err("%s: Could not get lcd_reset_gpio\n", __func__); + + if (dsi1_panel.use_ext_te) { + status = omap_mux_init_signal("gpmc_ncs4.gpio_101", + OMAP_PIN_INPUT_PULLUP); + if (status) + pr_err("%s: Could not get ext_te gpio\n", __func__); + } + + status = gpio_request_one(LCD_BL_GPIO, GPIOF_DIR_OUT, "lcd_bl_gpio"); + if (status) + pr_err("%s: Could not get lcd_bl_gpio\n", __func__); + + gpio_set_value(LCD_BL_GPIO, 0); +} + static void sdp4430_hdmi_mux_init(void) { /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ @@ -668,6 +737,43 @@ static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free(HDMI_GPIO_HPD); } +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .use_esd_check = false, + .set_backlight = dsi1_panel_set_backlight, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .clk_lane = 1, + .clk_pol = 0, + .data1_lane = 2, + .data1_pol = 0, + .data2_lane = 3, + .data2_pol = 0, + .div = { + .regn = 16, /* Fint = 2.4 MHz */ + .regm = 180, /* DDR Clock = 216 MHz */ + .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */ + .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */ + + .lp_clk_div = 10, /* LP Clock = 8.64 MHz */ + + .lck_div = 1, /* Logic Clock = 172.8 MHz */ + .pck_div = 5, /* Pixel Clock = 34.56 MHz */ + + }, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -678,17 +784,19 @@ static struct omap_dss_device sdp4430_hdmi_device = { }; static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, &sdp4430_hdmi_device, }; static struct omap_dss_board_info sdp4430_dss_data = { .num_devices = ARRAY_SIZE(sdp4430_dss_devices), .devices = sdp4430_dss_devices, - .default_device = &sdp4430_hdmi_device, + .default_device = &sdp4430_lcd_device, }; void omap_4430sdp_display_init(void) { + sdp4430_lcd_init(); sdp4430_hdmi_mux_init(); omap_display_init(&sdp4430_dss_data); } -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
