[pm-core][PATCH v3 12/21] OMAP4: PM: Add L2 cache lowpower support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When MPUSS hits off-mode e, L2 cache is lost. This patch adds L2X0
necessary maintenance operations and context restoration in the
low power code.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Cc: Kevin Hilman <khilman@xxxxxx>
---
 arch/arm/mach-omap2/omap4-mpuss-lowpower.c |   18 ++++++++
 arch/arm/mach-omap2/omap4-sar-layout.h     |    2 +
 arch/arm/mach-omap2/sleep44xx.S            |   65 ++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap4-mpuss-lowpower.c b/arch/arm/mach-omap2/omap4-mpuss-lowpower.c
index ddf5b72..026c955 100644
--- a/arch/arm/mach-omap2/omap4-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap4-mpuss-lowpower.c
@@ -49,6 +49,7 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include <plat/omap44xx.h>
 #include <mach/omap4-common.h>
@@ -336,6 +337,21 @@ ret:
 	return 0;
 }
 
+static void save_l2x0_auxctrl(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * Save the L2X0 AUXCTRL value to SAR memory. Its used to
+	 * in every restore patch MPUSS OFF path.
+	 */
+	void __iomem *l2x0_base = omap4_get_l2cache_base();
+	u32 val;
+
+	val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
+	__raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
+#endif
+}
+
 /*
  * Initialise OMAP4 MPUSS
  */
@@ -418,6 +434,8 @@ int __init omap4_mpuss_init(void)
 	for (i = 0; i < max_spi_reg; i++)
 		sar_writel(GIC_ISR_NON_SECURE, ICDISR_SPI_OFFSET, i);
 
+	save_l2x0_auxctrl();
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index 3f3e3c9..c72c0c5 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -25,6 +25,8 @@
 #define MMU_OFFSET				0xd00
 #define SCU_OFFSET0				0xd20
 #define SCU_OFFSET1				0xd24
+#define L2X0_OFFSET				0xd28
+#define L2X0_AUXCTRL_OFFSET			0xd2c
 
 /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
 #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET		0xa04
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index ccaf0e6..54fee44 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -13,6 +13,7 @@
 #include <asm/system.h>
 #include <asm/smp_scu.h>
 #include <asm/memory.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include <plat/omap44xx.h>
 #include <mach/omap4-common.h>
@@ -59,8 +60,10 @@ ENTRY(omap4_cpu_suspend)
 	cmp	r1, #0x0
 	beq	do_WFI				@ Nothing to save, jump to WFI
 	mov	r5, r0
+	mov	r6, r1
 	bl	omap4_get_sar_ram_base
 	mov	r8, r0
+	str	r6, [r8, #L2X0_OFFSET]		@ Store save state
 	ands	r5, r5, #0x0f
 	orreq	r8, r8, #CPU0_SAVE_OFFSET
 	orrne	r8, r8, #CPU1_SAVE_OFFSET
@@ -138,6 +141,42 @@ ENTRY(omap4_cpu_suspend)
 	ldrne	r1, [r8, #SCU_OFFSET1]
 	bl	omap4_get_scu_base
 	bl     scu_power_mode
+	isb
+	dsb
+
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * Clean and invalidate the L2 cache.
+	 * Common cache-l2x0.c functions can't be used here since it
+	 * uses spinlocks. We are out of coherency here with data cache
+	 * disabled. The spinlock implementation uses exclusive load/store
+	 * instruction which can fail without data cache being enabled.
+	 * OMAP4 hardware doesn't support exclusive monitor which can
+	 * overcome exclusive access issue. Because of this, CPU can
+	 * lead to deadlock.
+	 */
+l2x_clean_inv:
+	bl	omap4_get_sar_ram_base
+	mov	r8, r0
+	ldr	r0, [r8, #L2X0_OFFSET]
+	cmp	r0, #3
+	bne	do_WFI
+	bl	omap4_get_l2cache_base
+	mov	r2, r0
+	mov	r0, #0xff
+	str	r0, [r2, #L2X0_CLEAN_WAY]
+wait:
+	ldr	r0, [r2, #L2X0_CLEAN_WAY]
+	ands	r0, r0, #0xff
+	bne	wait
+l2x_sync:
+	mov	r0, #0x0
+	str	r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+	ldr	r0, [r2, #L2X0_CACHE_SYNC]
+	ands	r0, r0, #0x1
+	bne	sync
+#endif
 
 do_WFI:
 	/*
@@ -199,6 +238,32 @@ ENDPROC(omap4_cpu_suspend)
  */
 
 ENTRY(omap4_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	/*
+	 * Restore the L2 AUXCTRL and enable the L2 cache.
+	 * 0x109 =  Program the L2X0 AUXCTRL
+	 * 0x102 =  Enable the L2 using L2X0 CTRL
+	 * register r0 contains value to be programmed.
+	 * L2 cache is already invalidate by ROM code as part
+	 * of MPUSS OFF wakeup path.
+	 */
+	ldr	r2, =OMAP44XX_L2CACHE_BASE
+	ldr	r0, [r2, #L2X0_CTRL]
+	and	r0, #0x0f
+	cmp	r0, #1
+	beq	skip_l2en			@ Skip if already enabled
+	ldr	r3, =OMAP44XX_SAR_RAM_BASE
+	ldr	r0, [r3, #L2X0_AUXCTRL_OFFSET]
+	ldr	r12, =0x109			@ Setup L2 AUXCTRL value
+	dsb
+	smc	#0
+	mov	r0, #0x1
+	ldr	r12, =0x102			@ Enable L2 Cache controller
+	dsb
+	smc	#0
+skip_l2en:
+#endif
+
 	/*
 	 * Check the wakeup cpuid and use appropriate
 	 * SAR BANK location for context restore.
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux