On Sun, 2011-03-27 at 04:39 +0200, Sebastian Reichel wrote: > Hi, > > I've got problems getting a working tty with the mainline 2.6.38 > kernel on my Nokia N900. Here is the related output from dmesg: > > $ grep -E "(omapdss|omapfb|acx565akm)" dmesg > [ 0.890899] omapdss CORE: clk ick, rate 83000000 > [ 0.890930] omapdss CORE: clk dss1_fck, rate 96000000 > [ 0.890991] omapdss CORE: clk dss2_fck, rate 19200000 > [ 0.891021] omapdss CORE: clk tv_fck, rate 54000000 > [ 0.891052] omapdss CORE: clk video_fck, rate 96000000 > [ 0.891143] omapdss CORE: initial ctx id 0 > [ 0.950469] omapdss CORE: save context > [ 0.950714] omapdss CORE: bus_match. dev display0/panel-acx565akm, drv panel-acx565akm > [ 0.950775] omapdss CORE: driver_probe: dev display0/panel-acx565akm, drv panel-acx565akm > [ 0.950805] omapdss SDI: SDI init > [ 1.004455] omapdss CORE: save context > [ 1.059173] omapdss CORE: save context > [ 1.113830] omapdss CORE: save context > [ 1.129608] acx565akm spi1.2: omapfb: acx565akm rev 8b LCD detected > [ 1.130065] omapdss CORE: probe done for device display0 > [ 1.130096] omapdss CORE: bus_match. dev display1/venc, drv panel-acx565akm > [ 1.303741] OMAPFB: omapfb_init > [ 1.303894] OMAPFB: omapfb_probe > [ 1.303924] omapfb omapfb: no driver for display > [ 1.304016] omapfb omapfb: failed to setup omapfb > > You can find the full dmesg and the full kernel config at [0] and > [1]. Can you tell me the reason for the "no driver for display" > message? I thought acx565akm has been registered as display driver > directly before. You also need VENC driver for the tv-out: CONFIG_OMAP2_DSS_VENC Granted, DSS could handle this case a bit better, by continuing but refusing to let the user enable the tv-out... Tomi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
