On OMAP4430 ES1.0, Power Management features are not supported.
Avoid omap4_pm_init() on ES1.0 silicon so that we can continue
to use same kernel binary to boot on all OMAP4 silicons.
The ES1.0 boot failure with OMAP4 PM series was because of
the clockdomain initialisation code. Hardware supervised
clockdomain mode isn't functional for all clockdomains
on OMAP4430 ES1.0 silicon so avoid the same.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Reported-by: Kevin Hilman <khilman@xxxxxx>
Cc: Kevin Hilman <khilman@xxxxxx>
---
Patch applies on top of OMAP4 PM series
arch/arm/mach-omap2/pm44xx.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index e887a5d..2e18c1d 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -203,6 +203,11 @@ static int __init omap4_pm_init(void)
if (!cpu_is_omap44xx())
return -ENODEV;
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+ return -ENODEV;
+ }
+
pr_err("Power Management for TI OMAP4.\n");
#ifdef CONFIG_PM
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
