Tony, >-----Original Message----- >From: Tony Lindgren [mailto:tony@xxxxxxxxxxx] >Sent: Thursday, March 10, 2011 2:02 AM >To: Sricharan R >Cc: linux-omap@xxxxxxxxxxxxxxx; Benoit Cousson; Santosh Shilimkar; >paul@xxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx >Subject: [PATCH] omap2+: mux: Add macro for configuring static with >omap_hwmod_mux_init (Re: [PATCH] omap2+: mux: Remove the use of IDLE flag) > >* Sricharan R <r.sricharan@xxxxxx> [110309 03:47]: >> >> Btw,I have fixed the comments on the below patches that >> I sent for configuring the serial pads. >> >> 4430sdp: >> http://marc.info/?l=linux-omap&m=129900334420003&w=2 >> >> omap4panda: >> http://marc.info/?l=linux-omap&m=129900338520082&w=2 >> >> 3430sdp: >> http://marc.info/?l=linux-omap&m=129619117726479&w=2 >> >> Can you please check if they are ok? > >Look OK to me, but let's make things a bit easier to read >and maintain with the following patch. Can you please >update your patches to use this macro? > >Each line then just becomes something like: > >OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", > OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), > Ok thanks. I will update and send again. >Regards, > >Tony > > >From: Tony Lindgren <tony@xxxxxxxxxxx> >Date: Wed, 9 Mar 2011 12:14:04 -0800 >Subject: [PATCH] omap2+: mux: Add macro for configuring static with >omap_hwmod_mux_init > >Add macro for defining static pins in the board file. > >We can now start implementing pin multiplexing in the platform init >code for devices that call omap_hwmod_mux_init. Currently that is >only implemented for serial.c. > >Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > >--- a/arch/arm/mach-omap2/mux.h >+++ b/arch/arm/mach-omap2/mux.h >@@ -186,6 +186,12 @@ struct omap_device_pad { > > struct omap_hwmod_mux_info; > >+#define OMAP_MUX_STATIC(signal, mode) \ >+{ \ >+ .name = (signal), \ >+ .enable = (mode), \ >+} >+ > #if defined(CONFIG_OMAP_MUX) > > /** -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
