On Fri, Mar 04, 2011 at 09:48:26AM +0530, G, Manjunath Kondaiah wrote: > On Thu, Mar 03, 2011 at 10:35:23AM -0800, Kevin Hilman wrote: > > "G, Manjunath Kondaiah" <manjugk@xxxxxx> writes: > > > > > This patch series is remaining part of dma hwmod to support pm runtime > > > and for handling mstandby mode for all applicable DMA mstandby mode errata. > > > > This is still not runtime-suspending when I use my DMA test in linking > > mode. > > > > If I put a large enough period between transfers, it should autosuspend > > during transfers. It seems to do auto-suspend and resume once, but then > > it never suspends again. > > > > I tested with my dmatest module[1], and loaded with: > > > > # insmod ./dmatest.ko linking=1 forever=1 forever_period=1024 > > > > Not only does it not auto-suspend between transfers (which I expected), > > it also doesn't suspend after removing the module which stops all active > > channels. > > The normal chaining test cases are executed and which used to show the > proper status. Let me reproduce this issue with your test procedure. ok. I am able to reproduce this issue and fixed _get_sync usage in omap_start_dma if channel linking is used. Earlier it was handled for the cases with chaining API's. If linking is done without chaining API's, it will result in _get_sync and _put mismatch. Thanks for the test case and I will be re posting the patches with the above fix. -Manjunath -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
