On 2/21/2011 8:03 PM, Shilimkar, Santosh wrote:
-----Original Message-----
From: Cousson, Benoit [mailto:b-cousson@xxxxxx]
Sent: Monday, February 21, 2011 11:41 PM
To: Shilimkar, Santosh
Cc: linux-omap@xxxxxxxxxxxxxxx; Balbi, Felipe; R, Sricharan
Subject: Re: [PATCH 5/6] omap4: Initialise the l3 device with the
hwmod data.
On 2/21/2011 2:46 PM, Shilimkar, Santosh wrote:
From: sricharan<r.sricharan@xxxxxx>
The l3 interconnect device is build with all the data required
to handle the error logging. The data is extracted from the
hwmod data base.
Signed-off-by: sricharan<r.sricharan@xxxxxx>
Signed-off-by: sricharan<r.sricharan@xxxxxx>
Tested-by: sricharan<r.sricharan@xxxxxx>
Mmm, I'm not sure the tested-by is meaningfull in your case, since
you wrote the code and so everybody will assume you tested it.
One s-o-b should be probably enough.
Well he tested whole series including the patch from Felipe.
So a tested-by on whole series doesn't hurt, right ?
Just for record, I have seen tested by applied on whole series
Where as some of the patches in this series are just comment
updates.
Cc: Benoit Cousson<b-cousson@xxxxxx>
---
arch/arm/mach-omap2/devices.c | 23 +++++++++++++++++++++++
1 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-
omap2/devices.c
index 2d46f55..25fa2ad 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -57,6 +57,29 @@ static int __init omap3_l3_init(void)
}
postcore_initcall(omap3_l3_init);
+static int __init omap4_l3_init(void)
+{
+ int l;
+ struct omap_hwmod *oh;
+ struct omap_device *od;
+ char oh_name[12];
+
+ l = snprintf(oh_name, 12, "l3_main_1");
+
+ oh = omap_hwmod_lookup(oh_name);
+
+ if (!oh)
+ pr_err("could not look up %s\n", oh_name);
+
+ od = omap_device_build("omap4-l3-interconnect", 0, oh, NULL,
In order to stick to the OMAP device naming convention and to have
something not dependent of the chip version, I think we'd better
name
the device like that: "omap_l3_noc". Since it is a Arteris "Network
On
Chip" on OMAP4. We will not have to change it for OMAP5 then.
On OMAP3 the name can then be "omap_l3_smx" for the Sonics MX
interconnect.
Device name changes are fine but file name changes as per this.
dosn't look right if they are like
omap_l3_noc.c
omap_l3_smx.c
Why do you think that does not look right?
May be we can rename them like below
omap_l3_3xxx.c
omap_l3_4xxx.c
The point is that it will really depend of the amount of SoC specifics
data are in this file. If most of the code is reusable on OMAP5 for
example, then it makes sense to use the name of the IP.
If that's not the case, then you'd better use the SoC name.
Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
