RE: [PATCH 0/6] omap3: pm: Fixes for low power code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Kevin Hilman [mailto:khilman@xxxxxx]
> Sent: Thursday, March 03, 2011 6:53 AM
> To: Santosh Shilimkar
> Cc: linux-omap@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 0/6] omap3: pm: Fixes for low power code
>
> Hi Santosh,
>
> Santosh Shilimkar <santosh.shilimkar@xxxxxx> writes:
>
> > The series does below fixes to the omap3 low power code.
> > 	1. Use supported ARMv7 instructions instead of the legacy ones
> > 	2. Fix the MMU on sequence
> > 	3. Fix the cache flush scenario when only L1 lost.
> > 	4. Remove all un-necessary context save registers
> > 	5. Disable C-bit before cache clean
> > 	6. Use set_cr() exported API instead of custom one.
>
> Look like good cleanups, thanks.
>
> > It's generated against mainline and tested with OMAP3630 ZOOM3.
> > 	1. Renetion and off-mode mode in suspend - ok.
> > 	2. Retention in idle - ok
>
> Testing this series along with other PM changes queued up for
> mainline
> (my pm-core branch), this doesn't work for me on 3630/Zoom3 (but
> works fine on 3430/n900.)
>
> Here's what I did using omap2plus_defconfig + enabling CPUidle
>
> First tested suspend:
>
> echo 4 > /debug/pm_debug/wakeup_timer_seconds
> echo mem > /sys/power/state
>
> then, setup UART idle/wakeup:
>
> echo 5 > /sys/devices/platform/omap/omap_uart.0/sleep_timeout
> echo 5 > /sys/devices/platform/omap/omap_uart.1/sleep_timeout
> echo 5 > /sys/devices/platform/omap/omap_uart.2/sleep_timeout
> echo 5 > /sys/devices/platform/omap/omap_uart.3/sleep_timeout
> echo enabled >
> /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup
>
> then enabled idle:
>
> echo 1 > /debug/pm_debug/sleep_while_idle
>
> As soon as I do this, it hangs.
>
> Without your series, it's working fine for me.  Only after merging
> your series it hangs.
>
Interesting. I was seeing cpuidle hang on my 3630 without this
Series when tested on mainline.
Will rebase this series on your pm-core branch and look
at the issue further.

Regards,
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux