add names to EHCI and OHCI resources. That will help us
identify the resource correctly when moving to a setup
where OHCI and EHCI play well together.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
arch/arm/mach-omap2/usb-ehci.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index 25eeada..2c74fa1 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -350,6 +350,11 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
setup_4430ehci_io_mux(pdata->port_mode);
}
+ ehci_resources[0].name = "ehci";
+ ehci_resources[1].name = "uhh";
+ ehci_resources[2].name = "tll";
+ ehci_resources[3].name = "irq";
+
if (platform_device_register(&ehci_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
return;
@@ -369,21 +374,25 @@ void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
static struct resource ohci_resources[] = {
{
+ .name = "ohci",
.start = OMAP34XX_OHCI_BASE,
.end = OMAP34XX_OHCI_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
+ .name = "uhh",
.start = OMAP34XX_UHH_CONFIG_BASE,
.end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
+ .name = "tll",
.start = OMAP34XX_USBTLL_BASE,
.end = OMAP34XX_USBTLL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
{ /* general IRQ */
+ .name = "irq",
.start = INT_34XX_OHCI_IRQ,
.flags = IORESOURCE_IRQ,
}
--
1.7.4.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
